15 Search Results for "Khan, Shahbaz"

Document
DOI: 10.4230/LIPIcs.ITCS.2026.5
Maximum-Flow and Minimum-Cut Sensitivity Oracles for Directed Graphs

Authors: Mridul Ahi, Keerti Choudhary, Shlok Pande, Pushpraj, and Lakshay Saggi

Published in: LIPIcs, Volume 362, 17th Innovations in Theoretical Computer Science Conference (ITCS 2026)

Abstract
This paper addresses the problem of designing fault-tolerant data structures for the (s,t)-max-flow and (s,t)-min-cut problems in unweighted directed graphs. Given a directed graph G = (V, E) with a designated source s, sink t, and an (s,t)-max-flow of value λ, we present constructions for max-flow and min-cut sensitivity oracles, and introduce the concept of a fault-tolerant flow family, which may be of independent interest. Our main contributions are as follows. 1) Fault-Tolerant Flow Family: We construct a family ℬ of 2λ+1 (s,t)-flows such that for every edge e, ℬ contains an (s,t)-max-flow of G-e. This covering property is tight up to constants for single failures and provably cannot extend to comparably small families for k ≥ 2, where we show an Ω(n) lower bound on the family size, independent of λ. 2) Max-Flow Sensitivity Oracle: Using the fault-tolerant flow family, we construct a single as well as dual-edge sensitivity oracle for (s,t)-max-flow that requires only O(λ n) space. Given any set F of up to two failing edges, the oracle reports the updated max-flow value in G-F in O(n) time. Additionally, for the single-failure case, the oracle can determine in constant time whether the flow through an edge x changes when another edge e fails. 3) Min-Cut Sensitivity Oracle for Dual Failures: Recently, Baswana et al. (ICALP’22) designed an O(n²)-sized oracle for answering (s,t)-min-cut size queries under dual edge failures in constant time, along with a matching lower bound. We extend this by focusing on graphs with small min-cut values λ, and present a more compact oracle of size O(λ n) that answers such min-cut size queries in constant time and reports the corresponding (s,t)-min-cut partition in O(n) time. We also show that the space complexity of our oracle is asymptotically optimal in this setting. 4) Min-Cut Sensitivity Oracle for Multiple Failures: We extend our results to the general case of k edge failures. For any graph with (s,t)-min-cut of size λ, we construct a k-fault-tolerant min-cut oracle with space complexity O_{λ,k}(n log n) that answers min-cut size queries in O_{λ,k}(log n) time. This also leads to improved fault-tolerant (s,t)-reachability oracles, achieving O(n log n) space and O(log n) query time for up to k = O(1) edge failures.
Cite as

Mridul Ahi, Keerti Choudhary, Shlok Pande, Pushpraj, and Lakshay Saggi. Maximum-Flow and Minimum-Cut Sensitivity Oracles for Directed Graphs. In 17th Innovations in Theoretical Computer Science Conference (ITCS 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 362, pp. 5:1-5:24, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{ahi_et_al:LIPIcs.ITCS.2026.5,
  author =	{Ahi, Mridul and Choudhary, Keerti and Pande, Shlok and Pushpraj and Saggi, Lakshay},
  title =	{{Maximum-Flow and Minimum-Cut Sensitivity Oracles for Directed Graphs}},
  booktitle =	{17th Innovations in Theoretical Computer Science Conference (ITCS 2026)},
  pages =	{5:1--5:24},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-410-9},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{362},
  editor =	{Saraf, Shubhangi},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ITCS.2026.5},
  URN =		{urn:nbn:de:0030-drops-252920},
  doi =		{10.4230/LIPIcs.ITCS.2026.5},
  annote =	{Keywords: Fault tolerance, Data structures, Minimum cuts, Maximum flows}
}
Document
DOI: 10.4230/LIPIcs.ESA.2025.55
Safe Sequences via Dominators in DAGs for Path-Covering Problems

Authors: Francisco Sena, Romeo Rizzi, and Alexandru I. Tomescu

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
A path-covering problem on a directed acyclic graph (DAG) requires finding a set of source-to-sink paths that cover all the nodes, all the arcs, or subsets thereof, and additionally they are optimal with respect to some function. In this paper we study safe sequences of nodes or arcs, namely sequences that appear in some path of every path cover of a DAG. We show that safe sequences admit a simple characterization via cutnodes. Moreover, we establish a connection between maximal safe sequences and leaf-to-root paths in the source- and sink-dominator trees of the DAG, which may be of independent interest in the extensive literature on dominators. With dominator trees, safe sequences admit an O(n)-size representation and a linear-time output-sensitive enumeration algorithm running in time O(m + o), where n and m are the number of nodes and arcs, respectively, and o is the total length of the maximal safe sequences. We then apply maximal safe sequences to simplify Integer Linear Programs (ILPs) for two path-covering problems, LeastSquares and MinPathError, which are at the core of RNA transcript assembly problems from bioinformatics. On various datasets, maximal safe sequences can be computed in under 0.1 seconds per graph, on average, and ILP solvers whose search space is reduced in this manner exhibit significant speed-ups. For example on graphs with a large width, average speed-ups are in the range 50-250× for MinPathError and in the range 80-350× for LeastSquares. Optimizing ILPs using safe sequences can thus become a fast building block of practical RNA transcript assembly tools, and more generally, of path-covering problems.
Cite as

Francisco Sena, Romeo Rizzi, and Alexandru I. Tomescu. Safe Sequences via Dominators in DAGs for Path-Covering Problems. In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 55:1-55:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{sena_et_al:LIPIcs.ESA.2025.55,
  author =	{Sena, Francisco and Rizzi, Romeo and Tomescu, Alexandru I.},
  title =	{{Safe Sequences via Dominators in DAGs for Path-Covering Problems}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{55:1--55:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.55},
  URN =		{urn:nbn:de:0030-drops-245230},
  doi =		{10.4230/LIPIcs.ESA.2025.55},
  annote =	{Keywords: directed acyclic graph, path cover, dominator tree, integer linear programming, least squares, minimum path error}
}
Document
DOI: 10.4230/LIPIcs.ESA.2025.22
Constructing Long Paths in Graph Streams

Authors: Christian Konrad and Chhaya Trehan

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
In the graph stream model of computation, an algorithm processes the edges of an n-vertex input graph in one or more sequential passes while using a memory that is sublinear in the input size. The streaming model poses significant challenges for algorithmically constructing long paths. Many known algorithms that are tasked with extending an existing path as a subroutine require an entire pass over the input to add a single additional edge. This raises a fundamental question: Are multiple passes inherently necessary to construct paths of non-trivial lengths, or can a single pass suffice? To address this question, we systematically study the Longest Path problem in the one-pass streaming model. In this problem, given a desired approximation factor α, the objective is to compute a path of length at least lp(G)/α, where lp(G) is the length of a longest path in the input graph G. We study the problem in the insertion-only and the insertion-deletion streaming models, and we give algorithms as well as space lower bounds for both undirected and directed graphs. Our results are: 1) We show that for undirected graphs, in both the insertion-only and the insertion-deletion models, there are semi-streaming algorithms, i.e., algorithms that use space O(n poly log n), that compute a path of length at least d/3 with high probability, where d is the average degree of the input graph. These algorithms can also yield an α-approximation to Longest Path using space Õ(n²/α). 2) Next, we show that such a result cannot be achieved for directed graphs, even in the insertion-only model. We show that computing a (n^{1-o(1)})-approximation to Longest Path in directed graphs in the insertion-only model requires space Ω(n²). This result is in line with recent results that demonstrate that processing directed graphs is often significantly harder than undirected graphs in the streaming model. 3) We further complement our results with two additional lower bounds. First, we show that semi-streaming space is insufficient for small constant factor approximations to Longest Path for undirected graphs in the insertion-only model. Last, in undirected graphs in the insertion-deletion model, we show that computing an α-approximation requires space Ω(n²/α³).
Cite as

Christian Konrad and Chhaya Trehan. Constructing Long Paths in Graph Streams. In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 22:1-22:19, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{konrad_et_al:LIPIcs.ESA.2025.22,
  author =	{Konrad, Christian and Trehan, Chhaya},
  title =	{{Constructing Long Paths in Graph Streams}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{22:1--22:19},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.22},
  URN =		{urn:nbn:de:0030-drops-244902},
  doi =		{10.4230/LIPIcs.ESA.2025.22},
  annote =	{Keywords: Longest Path Problem, Streaming Algorithms, One-way Two-party Communication Complexity}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.27
Minimum+1 Steiner Cut and Dual Edge Sensitivity Oracle: Bridging Gap between Global and (s,t)-cut

Authors: Koustav Bhanja

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
Let G = (V,E) be an undirected multi-graph on n = |V| vertices and S ⊆ V be a Steiner set in G. Steiner cut is a fundamental concept; moreover, global cut (|S| = n), as well as (s,t)-cut (|S| = 2), is just a special case of Steiner cut. We study Steiner cuts of capacity minimum+1, and as an important application, we provide a dual edge Sensitivity Oracle for Steiner mincut - a compact data structure for efficiently reporting a Steiner mincut after failure/insertion of any pair of edges. A compact data structure for cuts of capacity minimum+1 has been designed for both global cuts [Dinitz and Nutov, STOC 1995] and (s,t)-cuts [Baswana, Bhanja, and Pandey, ICALP 2022 & TALG 2023]. Moreover, both data structures are also used crucially to design a dual edge Sensitivity Oracle for their respective mincuts. Unfortunately, except for these two extreme scenarios of Steiner cuts, no generalization of these results is known. Therefore, to address this gap, we present the following first results on Steiner cuts for any S satisfying 2 ≤ |S| ≤ n. 1) Data Structure for Minimum+1 Steiner Cut: There is an {O}(n(n-|S|+1)) space data structure that, given any pair of vertices u,v, can determine in {O}(1) time whether the Steiner cut of the least capacity separating u and v has capacity minimum+1. It can report such a cut, if it exists, in {O}(n) time, which is worst-case optimal. 2) Dual Edge Sensitivity Oracle: We design the following pair of data structures. (a) There is an {O}(n(n-|S|+1)) space data structure that, after the failure or insertion of any pair of edges in G, can report the capacity of Steiner mincut in {O}(1) time and a Steiner mincut in {O}(n) time, which is worst-case optimal. (b) If we are interested in reporting only the capacity of Steiner mincut, there is a more compact data structure that occupies {O}((n-|S|)²+n) space and can report the capacity of Steiner mincut in {O}(1) time after the failure or insertion of any pair of edges. 3) Lower Bound for Sensitivity Oracle: For undirected multi-graphs, for any Steiner set S ⊆ V, any data structure that, after the failure or insertion of any pair of edges, can report the capacity of Steiner mincut must occupy Ω((n-|S|)²) bits of space in the worst case, irrespective of the query time. To arrive at our results, we provide several techniques, especially a generalization of the 3-Star Lemma given by Dinitz and Vainshtein [SICOMP 2000], which is of independent interest. Our results achieve the same space and time bounds of the existing results for the two extreme scenarios of Steiner cuts - global and (s,t)-cut. In addition, the space occupied by our data structures in (1) and (2) reduces as |S| tends to n. Also, they occupy subquadratic space if |S| is close to n.
Cite as

Koustav Bhanja. Minimum+1 Steiner Cut and Dual Edge Sensitivity Oracle: Bridging Gap between Global and (s,t)-cut. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 27:1-27:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{bhanja:LIPIcs.ICALP.2025.27,
  author =	{Bhanja, Koustav},
  title =	{{Minimum+1 Steiner Cut and Dual Edge Sensitivity Oracle: Bridging Gap between Global and (s,t)-cut}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{27:1--27:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.27},
  URN =		{urn:nbn:de:0030-drops-234040},
  doi =		{10.4230/LIPIcs.ICALP.2025.27},
  annote =	{Keywords: cut, mincut, minimum+1, steiner, edge fault, sensitivity oracle, dual edges}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.91
Incremental Approximate Maximum Flow via Residual Graph Sparsification

Authors: Gramoz Goranci, Monika Henzinger, Harald Räcke, and A. R. Sricharan

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
We give an algorithm that, with high probability, maintains a (1-ε)-approximate s-t maximum flow in undirected, uncapacitated n-vertex graphs undergoing m edge insertions in Õ(m+ n F^*/ε) total update time, where F^{*} is the maximum flow on the final graph. This is the first algorithm to achieve polylogarithmic amortized update time for dense graphs (m = Ω(n²)), and more generally, for graphs where F^* = Õ(m/n). At the heart of our incremental algorithm is the residual graph sparsification technique of Karger and Levine [SICOMP '15], originally designed for computing exact maximum flows in the static setting. Our main contributions are (i) showing how to maintain such sparsifiers for approximate maximum flows in the incremental setting and (ii) generalizing the cut sparsification framework of Fung et al. [SICOMP '19] from undirected graphs to balanced directed graphs.
Cite as

Gramoz Goranci, Monika Henzinger, Harald Räcke, and A. R. Sricharan. Incremental Approximate Maximum Flow via Residual Graph Sparsification. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 91:1-91:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{goranci_et_al:LIPIcs.ICALP.2025.91,
  author =	{Goranci, Gramoz and Henzinger, Monika and R\"{a}cke, Harald and Sricharan, A. R.},
  title =	{{Incremental Approximate Maximum Flow via Residual Graph Sparsification}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{91:1--91:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.91},
  URN =		{urn:nbn:de:0030-drops-234686},
  doi =		{10.4230/LIPIcs.ICALP.2025.91},
  annote =	{Keywords: incremental flow, sparsification, approximate flow}
}
Document
DOI: 10.4230/LIPIcs.CPM.2025.12
Shortest Undirected Paths in de Bruijn Graphs

Authors: Wiktor Zuba, Oded Lachish, and Solon P. Pissis

Published in: LIPIcs, Volume 331, 36th Annual Symposium on Combinatorial Pattern Matching (CPM 2025)

Abstract
Computing shortest directed paths in de Bruijn graphs is well studied and well understood. This is not the case for computing undirected paths, which is much more challenging algorithmically. In this paper, we present a general framework for computing shortest undirected paths in arbitrary de Bruijn graphs, that is, arbitrary subgraphs of the complete de Bruijn graph. We then present an application of our techniques for making any arbitrary order-k de Bruijn graph G(V,E) weakly connected by adding a set of edges of minimum total cost. This improves the running time of the recent (2-2/d)-approximation algorithm by Bernardini et al. [CPM 2024] from 𝒪(k|V|²) to 𝒪(k|V|log d) time, where d is the number of weakly connected components of graph G.
Cite as

Wiktor Zuba, Oded Lachish, and Solon P. Pissis. Shortest Undirected Paths in de Bruijn Graphs. In 36th Annual Symposium on Combinatorial Pattern Matching (CPM 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 331, pp. 12:1-12:13, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{zuba_et_al:LIPIcs.CPM.2025.12,
  author =	{Zuba, Wiktor and Lachish, Oded and Pissis, Solon P.},
  title =	{{Shortest Undirected Paths in de Bruijn Graphs}},
  booktitle =	{36th Annual Symposium on Combinatorial Pattern Matching (CPM 2025)},
  pages =	{12:1--12:13},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-369-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{331},
  editor =	{Bonizzoni, Paola and M\"{a}kinen, Veli},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.CPM.2025.12},
  URN =		{urn:nbn:de:0030-drops-231060},
  doi =		{10.4230/LIPIcs.CPM.2025.12},
  annote =	{Keywords: string algorithm, graph algorithm, de Bruijn graph, Eulerian graph}
}
Document
DOI: 10.4230/LIPIcs.STACS.2025.24
A Deterministic Approach to Shortest Path Restoration in Edge Faulty Graphs

Authors: Keerti Choudhary and Rishabh Dhiman

Published in: LIPIcs, Volume 327, 42nd International Symposium on Theoretical Aspects of Computer Science (STACS 2025)

Abstract
Afek, Bremler-Barr, Kaplan, Cohen, and Merritt (PODC'01) in their seminal work on shortest path restorations demonstrated that after a single edge failure in a graph G, a replacement shortest path between any two vertices s and t, which avoids the failed edge, can be represented as the concatenation of two original shortest paths in G. They also showed that we cannot associate a canonical shortest path between the vertex pairs in G that consistently allows for the replacement path (in the surviving graph) to be represented as a concatenation of these canonical paths. Recently, Bodwin and Parter (PODC'21) proposed a randomized tie-breaking scheme for selecting canonical paths for the "ordered" vertex pairs in graph G with the desired property of representing the replacement shortest path as a concatenation of canonical shortest-paths provided for ordered pairs. An interesting open question is whether it is possible to provide a deterministic construction of canonical paths in an efficient manner. We address this question in our paper by presenting an O(mn) time deterministic algorithm to compute a canonical path family ℱ = {P_{x,y}, Q_{x,y} | x,y ∈ V} comprising of two paths per (unordered) vertex pair. Each replacement is either a PQ-path (of type P_{x,y}∘Q_{y,z}), a QP-path, a QQ-path, or a PP-path. Our construction is fairly simple and is a straightforward application of independent spanning trees. We also present various applications of family ℱ in computing fault-tolerant structures.
Cite as

Keerti Choudhary and Rishabh Dhiman. A Deterministic Approach to Shortest Path Restoration in Edge Faulty Graphs. In 42nd International Symposium on Theoretical Aspects of Computer Science (STACS 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 327, pp. 24:1-24:10, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{choudhary_et_al:LIPIcs.STACS.2025.24,
  author =	{Choudhary, Keerti and Dhiman, Rishabh},
  title =	{{A Deterministic Approach to Shortest Path Restoration in Edge Faulty Graphs}},
  booktitle =	{42nd International Symposium on Theoretical Aspects of Computer Science (STACS 2025)},
  pages =	{24:1--24:10},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-365-2},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{327},
  editor =	{Beyersdorff, Olaf and Pilipczuk, Micha{\l} and Pimentel, Elaine and Thắng, Nguy\~{ê}n Kim},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.STACS.2025.24},
  URN =		{urn:nbn:de:0030-drops-228499},
  doi =		{10.4230/LIPIcs.STACS.2025.24},
  annote =	{Keywords: Fault-tolerant Data-structures, Shortest Path Restoration, Replacement path}
}
Document
DOI: 10.4230/LIPIcs.STACS.2023.17
Cut Paths and Their Remainder Structure, with Applications

Authors: Massimo Cairo, Shahbaz Khan, Romeo Rizzi, Sebastian Schmidt, Alexandru I. Tomescu, and Elia C. Zirondelli

Published in: LIPIcs, Volume 254, 40th International Symposium on Theoretical Aspects of Computer Science (STACS 2023)

Abstract
In a strongly connected graph G = (V,E), a cut arc (also called strong bridge) is an arc e ∈ E whose removal makes the graph no longer strongly connected. Equivalently, there exist u,v ∈ V, such that all u-v walks contain e. Cut arcs are a fundamental graph-theoretic notion, with countless applications, especially in reachability problems. In this paper we initiate the study of cut paths, as a generalisation of cut arcs, which we naturally define as those paths P for which there exist u,v ∈ V, such that all u-v walks contain P as subwalk. We first prove various properties of cut paths and define their remainder structures, which we use to present a simple O(m)-time verification algorithm for a cut path (|V| = n, |E| = m). Secondly, we apply cut paths and their remainder structures to improve several reachability problems from bioinformatics, as follows. A walk is called safe if it is a subwalk of every node-covering closed walk of a strongly connected graph. Multi-safety is defined analogously, by considering node-covering sets of closed walks instead. We show that cut paths provide simple O(m)-time algorithms verifying if a walk is safe or multi-safe. For multi-safety, we present the first linear time algorithm, while for safety, we present a simple algorithm where the state-of-the-art employed complex data structures. Finally we show that the simultaneous computation of remainder structures of all subwalks of a cut path can be performed in linear time, since they are related in a structured way. These properties yield an O(mn)-time algorithm outputting all maximal multi-safe walks, improving over the state-of-the-art algorithm running in time O(m²+n³). The results of this paper only scratch the surface in the study of cut paths, and we believe a rich structure of a graph can be revealed, considering the perspective of a path, instead of just an arc.
Cite as

Massimo Cairo, Shahbaz Khan, Romeo Rizzi, Sebastian Schmidt, Alexandru I. Tomescu, and Elia C. Zirondelli. Cut Paths and Their Remainder Structure, with Applications. In 40th International Symposium on Theoretical Aspects of Computer Science (STACS 2023). Leibniz International Proceedings in Informatics (LIPIcs), Volume 254, pp. 17:1-17:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2023)

Copy BibTex To Clipboard

@InProceedings{cairo_et_al:LIPIcs.STACS.2023.17,
  author =	{Cairo, Massimo and Khan, Shahbaz and Rizzi, Romeo and Schmidt, Sebastian and Tomescu, Alexandru I. and Zirondelli, Elia C.},
  title =	{{Cut Paths and Their Remainder Structure, with Applications}},
  booktitle =	{40th International Symposium on Theoretical Aspects of Computer Science (STACS 2023)},
  pages =	{17:1--17:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-266-2},
  ISSN =	{1868-8969},
  year =	{2023},
  volume =	{254},
  editor =	{Berenbrink, Petra and Bouyer, Patricia and Dawar, Anuj and Kant\'{e}, Mamadou Moustapha},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.STACS.2023.17},
  URN =		{urn:nbn:de:0030-drops-176690},
  doi =		{10.4230/LIPIcs.STACS.2023.17},
  annote =	{Keywords: reachability, cut arc, strong bridge, covering walk, safety, persistence, essentiality, genome assembly}
}
Document
DOI: 10.4230/LIPIcs.ESA.2022.31
Width Helps and Hinders Splitting Flows

Authors: Manuel Cáceres, Massimo Cairo, Andreas Grigorjew, Shahbaz Khan, Brendan Mumey, Romeo Rizzi, Alexandru I. Tomescu, and Lucia Williams

Published in: LIPIcs, Volume 244, 30th Annual European Symposium on Algorithms (ESA 2022)

Abstract
Minimum flow decomposition (MFD) is the NP-hard problem of finding a smallest decomposition of a network flow X on directed graph G into weighted source-to-sink paths whose superposition equals X. We focus on a common formulation of the problem where the path weights must be non-negative integers and also on a new variant where these weights can be negative. We show that, for acyclic graphs, considering the width of the graph (the minimum number of s-t paths needed to cover all of its edges) yields advances in our understanding of its approximability. For the non-negative version, we show that a popular heuristic is a O(log |X|)-approximation (|X| being the total flow of X) on graphs satisfying two properties related to the width (satisfied by e.g., series-parallel graphs), and strengthen its worst-case approximation ratio from Ω(√m) to Ω(m / log m) for sparse graphs, where m is the number of edges in the graph. For the negative version, we give a (⌈log ║X║⌉+1)-approximation (║X║ being the maximum absolute value of X on any edge) using a power-of-two approach, combined with parity fixing arguments and a decomposition of unitary flows (║X║ ≤ 1) into at most width paths. We also disprove a conjecture about the linear independence of minimum (non-negative) flow decompositions posed by Kloster et al. [ALENEX 2018], but show that its useful implication (polynomial-time assignments of weights to a given set of paths to decompose a flow) holds for the negative version.
Cite as

Manuel Cáceres, Massimo Cairo, Andreas Grigorjew, Shahbaz Khan, Brendan Mumey, Romeo Rizzi, Alexandru I. Tomescu, and Lucia Williams. Width Helps and Hinders Splitting Flows. In 30th Annual European Symposium on Algorithms (ESA 2022). Leibniz International Proceedings in Informatics (LIPIcs), Volume 244, pp. 31:1-31:14, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2022)

Copy BibTex To Clipboard

@InProceedings{caceres_et_al:LIPIcs.ESA.2022.31,
  author =	{C\'{a}ceres, Manuel and Cairo, Massimo and Grigorjew, Andreas and Khan, Shahbaz and Mumey, Brendan and Rizzi, Romeo and Tomescu, Alexandru I. and Williams, Lucia},
  title =	{{Width Helps and Hinders Splitting Flows}},
  booktitle =	{30th Annual European Symposium on Algorithms (ESA 2022)},
  pages =	{31:1--31:14},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-247-1},
  ISSN =	{1868-8969},
  year =	{2022},
  volume =	{244},
  editor =	{Chechik, Shiri and Navarro, Gonzalo and Rotenberg, Eva and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2022.31},
  URN =		{urn:nbn:de:0030-drops-169695},
  doi =		{10.4230/LIPIcs.ESA.2022.31},
  annote =	{Keywords: Flow decomposition, approximation algorithms, graph width}
}
Document
DOI: 10.4230/LIPIcs.ESA.2022.72
Optimizing Safe Flow Decompositions in DAGs

Authors: Shahbaz Khan and Alexandru I. Tomescu

Published in: LIPIcs, Volume 244, 30th Annual European Symposium on Algorithms (ESA 2022)

Abstract
Network flow is one of the most studied combinatorial optimization problems having innumerable applications. Any flow on a directed acyclic graph G having n vertices and m edges can be decomposed into a set of O(m) paths. The applications of such a flow decomposition range from network routing to the assembly of biological sequences. However, in some applications, each solution (decomposition) corresponds to some particular data that generated the original flow. Given the possibility of multiple optimal solutions, no optimization criterion ensures the identification of the correct decomposition. Hence, recently flow decomposition was studied [RECOMB22] in the Safe and Complete framework, particularly for RNA Assembly. The proposed solution reported all the safe paths, i.e., the paths which are subpath of every possible solution of flow decomposition. They presented a characterization of the safe paths, resulting in an O(mn+out_R) time algorithm to compute all safe paths, where out_R is the size of the raw output reporting each safe path explicitly. They also showed that out_R can be Ω(mn²) in the worst case but O(m) in the best case. Hence, they further presented an algorithm to report a concise representation of the output out_C in O(mn+out_C) time, where out_C can be Ω(mn) in the worst case but O(m) in the best case. In this work, we study how different safe paths interact, resulting in optimal output-sensitive algorithms requiring O(m+out_R) and O(m+out_C) time for computing the existing representations of the safe paths. Our algorithm uses a novel data structure called Path Tries, which may be of independent interest. Further, we propose a new characterization of the safe paths resulting in the optimal representation of safe paths out_O, which can be Ω(mn) in the worst case but requires optimal O(1) space for every safe path reported. We also present a near-optimal algorithm to compute all the safe paths in O(m+out_Olog n) time. The new representation also establishes tighter worst case bounds Θ(mn²) and Θ(mn) bounds for out_R and out_C (along with out_O), respectively. Overall we further develop the theory of safe and complete solutions for the flow decomposition problem, giving an optimal algorithm for the explicit representation, and a near-optimal algorithm for the optimal representation of the safe paths.
Cite as

Shahbaz Khan and Alexandru I. Tomescu. Optimizing Safe Flow Decompositions in DAGs. In 30th Annual European Symposium on Algorithms (ESA 2022). Leibniz International Proceedings in Informatics (LIPIcs), Volume 244, pp. 72:1-72:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2022)

Copy BibTex To Clipboard

@InProceedings{khan_et_al:LIPIcs.ESA.2022.72,
  author =	{Khan, Shahbaz and Tomescu, Alexandru I.},
  title =	{{Optimizing Safe Flow Decompositions in DAGs}},
  booktitle =	{30th Annual European Symposium on Algorithms (ESA 2022)},
  pages =	{72:1--72:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-247-1},
  ISSN =	{1868-8969},
  year =	{2022},
  volume =	{244},
  editor =	{Chechik, Shiri and Navarro, Gonzalo and Rotenberg, Eva and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2022.72},
  URN =		{urn:nbn:de:0030-drops-170101},
  doi =		{10.4230/LIPIcs.ESA.2022.72},
  annote =	{Keywords: safety, flows, networks, directed acyclic graphs}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2021.43
Genome Assembly, from Practice to Theory: Safe, Complete and Linear-Time

Authors: Massimo Cairo, Romeo Rizzi, Alexandru I. Tomescu, and Elia C. Zirondelli

Published in: LIPIcs, Volume 198, 48th International Colloquium on Automata, Languages, and Programming (ICALP 2021)

Abstract
Genome assembly asks to reconstruct an unknown string from many shorter substrings of it. Even though it is one of the key problems in Bioinformatics, it is generally lacking major theoretical advances. Its hardness stems both from practical issues (size and errors of real data), and from the fact that problem formulations inherently admit multiple solutions. Given these, at their core, most state-of-the-art assemblers are based on finding non-branching paths (unitigs) in an assembly graph. While such paths constitute only partial assemblies, they are likely to be correct. More precisely, if one defines a genome assembly solution as a closed arc-covering walk of the graph, then unitigs appear in all solutions, being thus safe partial solutions. Until recently, it was open what are all the safe walks of an assembly graph. Tomescu and Medvedev (RECOMB 2016) characterized all such safe walks (omnitigs), thus giving the first safe and complete genome assembly algorithm. Even though omnitig finding was later improved to quadratic time, it remained open whether the crucial linear-time feature of finding unitigs can be attained with omnitigs. We answer this question affirmatively, by describing a surprising O(m)-time algorithm to identify all maximal omnitigs of a graph with n nodes and m arcs, notwithstanding the existence of families of graphs with Θ(mn) total maximal omnitig size. This is based on the discovery of a family of walks (macrotigs) with the property that all the non-trivial omnitigs are univocal extensions of subwalks of a macrotig. This has two consequences: (1) A linear-time output-sensitive algorithm enumerating all maximal omnitigs. (2) A compact O(m) representation of all maximal omnitigs, which allows, e.g., for O(m)-time computation of various statistics on them. Our results close a long-standing theoretical question inspired by practical genome assemblers, originating with the use of unitigs in 1995. We envision our results to be at the core of a reverse transfer from theory to practical and complete genome assembly programs, as has been the case for other key Bioinformatics problems.
Cite as

Massimo Cairo, Romeo Rizzi, Alexandru I. Tomescu, and Elia C. Zirondelli. Genome Assembly, from Practice to Theory: Safe, Complete and Linear-Time. In 48th International Colloquium on Automata, Languages, and Programming (ICALP 2021). Leibniz International Proceedings in Informatics (LIPIcs), Volume 198, pp. 43:1-43:18, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2021)

Copy BibTex To Clipboard

@InProceedings{cairo_et_al:LIPIcs.ICALP.2021.43,
  author =	{Cairo, Massimo and Rizzi, Romeo and Tomescu, Alexandru I. and Zirondelli, Elia C.},
  title =	{{Genome Assembly, from Practice to Theory: Safe, Complete and Linear-Time}},
  booktitle =	{48th International Colloquium on Automata, Languages, and Programming (ICALP 2021)},
  pages =	{43:1--43:18},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-195-5},
  ISSN =	{1868-8969},
  year =	{2021},
  volume =	{198},
  editor =	{Bansal, Nikhil and Merelli, Emanuela and Worrell, James},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2021.43},
  URN =		{urn:nbn:de:0030-drops-141122},
  doi =		{10.4230/LIPIcs.ICALP.2021.43},
  annote =	{Keywords: Graph algorithm, strong connectivity, reachability under failures}
}
Document
DOI: 10.4230/LIPIcs.CPM.2021.17
Optimal Construction of Hierarchical Overlap Graphs

Authors: Shahbaz Khan

Published in: LIPIcs, Volume 191, 32nd Annual Symposium on Combinatorial Pattern Matching (CPM 2021)

Abstract
Genome assembly is a fundamental problem in Bioinformatics, where for a given set of overlapping substrings of a genome, the aim is to reconstruct the source genome. The classical approaches to solving this problem use assembly graphs, such as de Bruijn graphs or overlap graphs, which maintain partial information about such overlaps. For genome assembly algorithms, these graphs present a trade-off between overlap information stored and scalability. Thus, Hierarchical Overlap Graph (HOG) was proposed to overcome the limitations of both these approaches. For a given set P of n strings, the first algorithm to compute HOG was given by Cazaux and Rivals [IPL20] requiring O(||P||+n²) time using superlinear space, where ||P|| is the cumulative sum of the lengths of strings in P. This was improved by Park et al. [SPIRE20] to O(||P||log n) time and O(||P||) space using segment trees, and further to O(||P||(log n)/(log log n)) for the word RAM model. Both these results described an open problem to compute HOG in optimal O(||P||) time and space. In this paper, we achieve the desired optimal bounds by presenting a simple algorithm that does not use any complex data structures. At its core, our solution improves the classical result [IPL92] for a special case of the All Pairs Suffix Prefix (APSP) problem from O(||P||+n²) time to optimal O(||P||) time, which may be of independent interest.
Cite as

Shahbaz Khan. Optimal Construction of Hierarchical Overlap Graphs. In 32nd Annual Symposium on Combinatorial Pattern Matching (CPM 2021). Leibniz International Proceedings in Informatics (LIPIcs), Volume 191, pp. 17:1-17:11, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2021)

Copy BibTex To Clipboard

@InProceedings{khan:LIPIcs.CPM.2021.17,
  author =	{Khan, Shahbaz},
  title =	{{Optimal Construction of Hierarchical Overlap Graphs}},
  booktitle =	{32nd Annual Symposium on Combinatorial Pattern Matching (CPM 2021)},
  pages =	{17:1--17:11},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-186-3},
  ISSN =	{1868-8969},
  year =	{2021},
  volume =	{191},
  editor =	{Gawrychowski, Pawe{\l} and Starikovskaya, Tatiana},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.CPM.2021.17},
  URN =		{urn:nbn:de:0030-drops-139683},
  doi =		{10.4230/LIPIcs.CPM.2021.17},
  annote =	{Keywords: Hierarchical Overlap Graphs, String algorithms, Genome assembly}
}
Document
DOI: 10.4230/LIPIcs.ESA.2020.58
Dynamic Matching Algorithms in Practice

Authors: Monika Henzinger, Shahbaz Khan, Richard Paul, and Christian Schulz

Published in: LIPIcs, Volume 173, 28th Annual European Symposium on Algorithms (ESA 2020)

Abstract
In recent years, significant advances have been made in the design and analysis of fully dynamic maximal matching algorithms. However, these theoretical results have received very little attention from the practical perspective. Few of the algorithms are implemented and tested on real datasets, and their practical potential is far from understood. In this paper, we attempt to bridge the gap between theory and practice that is currently observed for the fully dynamic maximal matching problem. We engineer several algorithms and empirically study those algorithms on an extensive set of dynamic instances.
Cite as

Monika Henzinger, Shahbaz Khan, Richard Paul, and Christian Schulz. Dynamic Matching Algorithms in Practice. In 28th Annual European Symposium on Algorithms (ESA 2020). Leibniz International Proceedings in Informatics (LIPIcs), Volume 173, pp. 58:1-58:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2020)

Copy BibTex To Clipboard

@InProceedings{henzinger_et_al:LIPIcs.ESA.2020.58,
  author =	{Henzinger, Monika and Khan, Shahbaz and Paul, Richard and Schulz, Christian},
  title =	{{Dynamic Matching Algorithms in Practice}},
  booktitle =	{28th Annual European Symposium on Algorithms (ESA 2020)},
  pages =	{58:1--58:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-162-7},
  ISSN =	{1868-8969},
  year =	{2020},
  volume =	{173},
  editor =	{Grandoni, Fabrizio and Herman, Grzegorz and Sanders, Peter},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2020.58},
  URN =		{urn:nbn:de:0030-drops-129243},
  doi =		{10.4230/LIPIcs.ESA.2020.58},
  annote =	{Keywords: Matching, Dynamic Matching, Blossom Algorithm}
}
Document
DOI: 10.4230/LIPIcs.STACS.2019.42
Depth First Search in the Semi-streaming Model

Authors: Shahbaz Khan and Shashank K. Mehta

Published in: LIPIcs, Volume 126, 36th International Symposium on Theoretical Aspects of Computer Science (STACS 2019)

Abstract
Depth first search (DFS) tree is a fundamental data structure for solving various graph problems. The classical algorithm for building a DFS tree requires O(m+n) time for a given undirected graph G having n vertices and m edges. In the streaming model, an algorithm is allowed several passes (preferably single) over the input graph having a restriction on the size of local space used. Now, a DFS tree of a graph can be trivially computed using a single pass if O(m) space is allowed. In the semi-streaming model allowing O(n) space, it can be computed in O(n) passes over the input stream, where each pass adds one vertex to the DFS tree. However, it remains an open problem to compute a DFS tree using o(n) passes using o(m) space even in any relaxed streaming environment. We present the first semi-streaming algorithms that compute a DFS tree of an undirected graph in o(n) passes using o(m) space. We first describe an extremely simple algorithm that requires at most ceil[n/k] passes to compute a DFS tree using O(nk) space, where k is any positive integer. For example using k=sqrt{n}, we can compute a DFS tree in sqrt{n} passes using O(n sqrt{n}) space. We then improve this algorithm by using more involved techniques to reduce the number of passes to ceil[h/k] under similar space constraints, where h is the height of the computed DFS tree. In particular, this algorithm improves the bounds for the case where the computed DFS tree is shallow (having o(n) height). Moreover, this algorithm is presented in form of a framework that allows the flexibility of using any algorithm to maintain a DFS tree of a stored sparser subgraph as a black box, which may be of an independent interest. Both these algorithms essentially demonstrate the existence of a trade-off between the space and number of passes required for computing a DFS tree. Furthermore, we evaluate these algorithms experimentally which reveals their exceptional performance in practice. For both random and real graphs, they require merely a few passes even when allowed just O(n) space.
Cite as

Shahbaz Khan and Shashank K. Mehta. Depth First Search in the Semi-streaming Model. In 36th International Symposium on Theoretical Aspects of Computer Science (STACS 2019). Leibniz International Proceedings in Informatics (LIPIcs), Volume 126, pp. 42:1-42:16, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2019)

Copy BibTex To Clipboard

@InProceedings{khan_et_al:LIPIcs.STACS.2019.42,
  author =	{Khan, Shahbaz and K. Mehta, Shashank},
  title =	{{Depth First Search in the Semi-streaming Model}},
  booktitle =	{36th International Symposium on Theoretical Aspects of Computer Science (STACS 2019)},
  pages =	{42:1--42:16},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-100-9},
  ISSN =	{1868-8969},
  year =	{2019},
  volume =	{126},
  editor =	{Niedermeier, Rolf and Paul, Christophe},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.STACS.2019.42},
  URN =		{urn:nbn:de:0030-drops-102818},
  doi =		{10.4230/LIPIcs.STACS.2019.42},
  annote =	{Keywords: Depth First Search, DFS, Semi-Streaming, Streaming, Algorithm}
}
Document
DOI: 10.4230/LIPIcs.ICALP.2017.127
Multiple Source Dual Fault Tolerant BFS Trees

Authors: Manoj Gupta and Shahbaz Khan

Published in: LIPIcs, Volume 80, 44th International Colloquium on Automata, Languages, and Programming (ICALP 2017)

Abstract
Let G=(V,E) be a graph with n vertices and m edges, with a designated set of sigma sources S subseteq V. The fault tolerant subgraph for any graph problem maintains a sparse subgraph H=(V,E') of G with E' subseteq E, such that for any set F of k failures, the solution for the graph problem on G\F is maintained in its subgraph H\F. We address the problem of maintaining a fault tolerant subgraph for computing Breath First Search tree (BFS) of the graph from a single source s in V (referred as k FT-BFS) or multiple sources S subseteq V (referred as k FT-MBFS). We simply refer to them as FT-BFS (or FT-MBFS) for k=1, and dual FT-BFS (or dual FT-MBFS) for k=2. The problem of k FT-BFS was first studied by Parter and Peleg [ESA13]. They designed an algorithm to compute FT-BFS subgraph of size O(n^{3/2}). Further, they showed how their algorithm can be easily extended to FT-MBFS requiring O(sigma^{1/2}n^{3/2}) space. They also presented matching lower bounds for these results. The result was later extended to solve dual FT-BFS by Parter [PODC15] requiring (n^{5/3}) space, again with matching lower bounds. However, their result was limited to only edge failures in undirected graphs and involved very complex analysis. Moreover, their solution doesn't seems to be directly extendible for dual FT-MBFS problem. We present a similar algorithm to solve dual FT-BFS problem with a much simpler analysis. Moreover, our algorithm also works for vertex failures and directed graphs, and can be easily extended to handle dual FT-MBFS problem, matching the lower bound of O(sigma^{1/3}n^{5/3}) space described by Parter [PODC15]. The key difference in our approach is a much simpler classification of path interactions which formed the basis of the analysis by Parter [PODC15].
Cite as

Manoj Gupta and Shahbaz Khan. Multiple Source Dual Fault Tolerant BFS Trees. In 44th International Colloquium on Automata, Languages, and Programming (ICALP 2017). Leibniz International Proceedings in Informatics (LIPIcs), Volume 80, pp. 127:1-127:15, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2017)

Copy BibTex To Clipboard

@InProceedings{gupta_et_al:LIPIcs.ICALP.2017.127,
  author =	{Gupta, Manoj and Khan, Shahbaz},
  title =	{{Multiple Source Dual Fault Tolerant BFS Trees}},
  booktitle =	{44th International Colloquium on Automata, Languages, and Programming (ICALP 2017)},
  pages =	{127:1--127:15},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-041-5},
  ISSN =	{1868-8969},
  year =	{2017},
  volume =	{80},
  editor =	{Chatzigiannakis, Ioannis and Indyk, Piotr and Kuhn, Fabian and Muscholl, Anca},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2017.127},
  URN =		{urn:nbn:de:0030-drops-74184},
  doi =		{10.4230/LIPIcs.ICALP.2017.127},
  annote =	{Keywords: BFS, fault-tolerant, graph, algorithms, data-structures}
}
  • Refine by Type
  • 15 Document/PDF
  • 7 Document/HTML

  • Refine by Publication Year
  • 1 2026
  • 6 2025
  • 1 2023
  • 2 2022
  • 2 2021
  • Show More...

  • Refine by Author
  • 7 Khan, Shahbaz
  • 5 Tomescu, Alexandru I.
  • 4 Rizzi, Romeo
  • 3 Cairo, Massimo
  • 2 Choudhary, Keerti
  • Show More...

  • Refine by Series/Journal
  • 15 LIPIcs

  • Refine by Classification
  • 4 Mathematics of computing → Paths and connectivity problems
  • 4 Theory of computation → Graph algorithms analysis
  • 3 Mathematics of computing → Graph algorithms
  • 3 Theory of computation → Data structures design and analysis
  • 3 Theory of computation → Network flows
  • Show More...

  • Refine by Keyword
  • 2 safety
  • 1 Algorithm
  • 1 BFS
  • 1 Blossom Algorithm
  • 1 DFS
  • Show More...

Any Issues?
X

Feedback on the Current Page

CAPTCHA

Thanks for your feedback!

Feedback submitted to Dagstuhl Publishing

Could not send message

Please try again later or send an E-mail
© 2023-2026 Schloss Dagstuhl – LZI GmbH Schloss Dagstuhl – LZI GmbH About DROPS Imprint Privacy Contact