36 Search Results for "Bodwin, Greg"

Document
DOI: 10.4230/LIPIcs.SEA.2026.8
General Multiplicative Spanners in Practice

Authors: Fritz Bökler, Markus Chimani, and Henning Jasper

Published in: LIPIcs, Volume 371, 24th International Symposium on Experimental Algorithms (SEA 2026)

Abstract
Given an undirected graph G with edge weights and lengths, a minimum α-spanner is a least-weight subgraph H ⊆ G that preserves distances w.r.t. the lengths between all node pairs up to a factor of α. Literature often takes the simplifying assumption of a single (coupled) edge function for weights and lengths. For such instances, several exact and non-exact algorithms are known and have been thoroughly evaluated in practice. However, many practical instances have decoupled form, as their weights and lengths are generally independent. Due to the increased complexity, only few (and even fewer practical) algorithms are able to guarantee low-weight solutions. This prompts practitioners to force their naturally decoupled instances into a coupled format, forsaking any quality guarantee. We implement several exact, approximative and heuristic algorithms for decoupled α-spanners, and use algorithm engineering to speed them up in practice. Our hypothesis-driven experiments evaluate their performance w.r.t. solution quality and speed. Generally, many practical instances can indeed be solved exactly within reasonable time, while LP-based approximation algorithms are not worthwhile. We find that standard greedy algorithms often yield acceptable results, but there are also practical instances for which they yield arbitrarily poor solutions. Here, augmented greedy variations offer a good compromise between solution quality and speed.
Cite as

Fritz Bökler, Markus Chimani, and Henning Jasper. General Multiplicative Spanners in Practice. In 24th International Symposium on Experimental Algorithms (SEA 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 371, pp. 8:1-8:21, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{bokler_et_al:LIPIcs.SEA.2026.8,
  author =	{B\"{o}kler, Fritz and Chimani, Markus and Jasper, Henning},
  title =	{{General Multiplicative Spanners in Practice}},
  booktitle =	{24th International Symposium on Experimental Algorithms (SEA 2026)},
  pages =	{8:1--8:21},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-422-2},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{371},
  editor =	{Aum\"{u}ller, Martin and Finocchi, Irene},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SEA.2026.8},
  URN =		{urn:nbn:de:0030-drops-260120},
  doi =		{10.4230/LIPIcs.SEA.2026.8},
  annote =	{Keywords: Graph spanners, ILP, experimental study, algorithm engineering}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2026.15
Euclidean Noncrossing Steiner Spanners of Nearly Optimal Sparsity

Authors: Sujoy Bhore, Sándor Kisfaludi‑Bak, Lazar Milenković, Csaba D. Tóth, Karol Węgrzycki, and Sampson Wong

Published in: LIPIcs, Volume 367, 42nd International Symposium on Computational Geometry (SoCG 2026)

Abstract
A Euclidean noncrossing Steiner (1+ε)-spanner for a point set P ⊂ ℝ² is a planar straight-line graph that, for any two points a, b ∈ P, contains a path whose length is at most 1+ε times the Euclidean distance between a and b. We construct a Euclidean noncrossing Steiner (1+ε)-spanner with O(n/ε^{3/2}) edges for any set of n points in the plane. This result improves upon the previous best upper bound of O(n/ε⁴) obtained nearly three decades ago. We also establish an almost matching lower bound: There exist n points in the plane for which any Euclidean noncrossing Steiner (1+ε)-spanner has Ω_μ(n/ε^{3/2-μ}) edges for any μ > 0. Our lower bound uses recent generalizations of the Szemerédi-Trotter theorem to disk-tube incidences in geometric measure theory.
Cite as

Sujoy Bhore, Sándor Kisfaludi‑Bak, Lazar Milenković, Csaba D. Tóth, Karol Węgrzycki, and Sampson Wong. Euclidean Noncrossing Steiner Spanners of Nearly Optimal Sparsity. In 42nd International Symposium on Computational Geometry (SoCG 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 367, pp. 15:1-15:18, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{bhore_et_al:LIPIcs.SoCG.2026.15,
  author =	{Bhore, Sujoy and Kisfaludi‑Bak, S\'{a}ndor and Milenkovi\'{c}, Lazar and T\'{o}th, Csaba D. and W\k{e}grzycki, Karol and Wong, Sampson},
  title =	{{Euclidean Noncrossing Steiner Spanners of Nearly Optimal Sparsity}},
  booktitle =	{42nd International Symposium on Computational Geometry (SoCG 2026)},
  pages =	{15:1--15:18},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-418-5},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{367},
  editor =	{Ahn, Hee-Kap and Hoffmann, Michael and Nayyeri, Amir},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2026.15},
  URN =		{urn:nbn:de:0030-drops-258210},
  doi =		{10.4230/LIPIcs.SoCG.2026.15},
  annote =	{Keywords: geometric network design, spanners, crossing number, incidences}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2026.13
Dynamic Light Spanners in Doubling Metrics

Authors: Sujoy Bhore, Jonathan Conroy, and Arnold Filtser

Published in: LIPIcs, Volume 367, 42nd International Symposium on Computational Geometry (SoCG 2026)

Abstract
A t-spanner of a point set X in a metric space (𝒳, δ) is a graph G with vertex set P such that, for any pair of points u,v ∈ X, the distance between u and v in G is at most t times δ(u,v). We study the problem of maintaining a spanner for a dynamic point set X - that is, when X undergoes a sequence of insertions and deletions - in a metric space of constant doubling dimension. For any constant ε > 0, we maintain a (1+ε)-spanner of P whose total weight remains within a constant factor of the weight of the minimum spanning tree of X. Each update (insertion or deletion) can be performed in poly(log Φ) time, where Φ denotes the aspect ratio of X. Prior to our work, no efficient dynamic algorithm for maintaining a light-weight spanner was known even for point sets in low-dimensional Euclidean space.
Cite as

Sujoy Bhore, Jonathan Conroy, and Arnold Filtser. Dynamic Light Spanners in Doubling Metrics. In 42nd International Symposium on Computational Geometry (SoCG 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 367, pp. 13:1-13:16, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{bhore_et_al:LIPIcs.SoCG.2026.13,
  author =	{Bhore, Sujoy and Conroy, Jonathan and Filtser, Arnold},
  title =	{{Dynamic Light Spanners in Doubling Metrics}},
  booktitle =	{42nd International Symposium on Computational Geometry (SoCG 2026)},
  pages =	{13:1--13:16},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-418-5},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{367},
  editor =	{Ahn, Hee-Kap and Hoffmann, Michael and Nayyeri, Amir},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2026.13},
  URN =		{urn:nbn:de:0030-drops-258193},
  doi =		{10.4230/LIPIcs.SoCG.2026.13},
  annote =	{Keywords: Dynamic data structures, spanners, light-weight, Euclidean metrics, doubling metrics}
}
Document
DOI: 10.4230/LIPIcs.ITCS.2026.5
Maximum-Flow and Minimum-Cut Sensitivity Oracles for Directed Graphs

Authors: Mridul Ahi, Keerti Choudhary, Shlok Pande, Pushpraj, and Lakshay Saggi

Published in: LIPIcs, Volume 362, 17th Innovations in Theoretical Computer Science Conference (ITCS 2026)

Abstract
This paper addresses the problem of designing fault-tolerant data structures for the (s,t)-max-flow and (s,t)-min-cut problems in unweighted directed graphs. Given a directed graph G = (V, E) with a designated source s, sink t, and an (s,t)-max-flow of value λ, we present constructions for max-flow and min-cut sensitivity oracles, and introduce the concept of a fault-tolerant flow family, which may be of independent interest. Our main contributions are as follows. 1) Fault-Tolerant Flow Family: We construct a family ℬ of 2λ+1 (s,t)-flows such that for every edge e, ℬ contains an (s,t)-max-flow of G-e. This covering property is tight up to constants for single failures and provably cannot extend to comparably small families for k ≥ 2, where we show an Ω(n) lower bound on the family size, independent of λ. 2) Max-Flow Sensitivity Oracle: Using the fault-tolerant flow family, we construct a single as well as dual-edge sensitivity oracle for (s,t)-max-flow that requires only O(λ n) space. Given any set F of up to two failing edges, the oracle reports the updated max-flow value in G-F in O(n) time. Additionally, for the single-failure case, the oracle can determine in constant time whether the flow through an edge x changes when another edge e fails. 3) Min-Cut Sensitivity Oracle for Dual Failures: Recently, Baswana et al. (ICALP’22) designed an O(n²)-sized oracle for answering (s,t)-min-cut size queries under dual edge failures in constant time, along with a matching lower bound. We extend this by focusing on graphs with small min-cut values λ, and present a more compact oracle of size O(λ n) that answers such min-cut size queries in constant time and reports the corresponding (s,t)-min-cut partition in O(n) time. We also show that the space complexity of our oracle is asymptotically optimal in this setting. 4) Min-Cut Sensitivity Oracle for Multiple Failures: We extend our results to the general case of k edge failures. For any graph with (s,t)-min-cut of size λ, we construct a k-fault-tolerant min-cut oracle with space complexity O_{λ,k}(n log n) that answers min-cut size queries in O_{λ,k}(log n) time. This also leads to improved fault-tolerant (s,t)-reachability oracles, achieving O(n log n) space and O(log n) query time for up to k = O(1) edge failures.
Cite as

Mridul Ahi, Keerti Choudhary, Shlok Pande, Pushpraj, and Lakshay Saggi. Maximum-Flow and Minimum-Cut Sensitivity Oracles for Directed Graphs. In 17th Innovations in Theoretical Computer Science Conference (ITCS 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 362, pp. 5:1-5:24, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{ahi_et_al:LIPIcs.ITCS.2026.5,
  author =	{Ahi, Mridul and Choudhary, Keerti and Pande, Shlok and Pushpraj and Saggi, Lakshay},
  title =	{{Maximum-Flow and Minimum-Cut Sensitivity Oracles for Directed Graphs}},
  booktitle =	{17th Innovations in Theoretical Computer Science Conference (ITCS 2026)},
  pages =	{5:1--5:24},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-410-9},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{362},
  editor =	{Saraf, Shubhangi},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ITCS.2026.5},
  URN =		{urn:nbn:de:0030-drops-252920},
  doi =		{10.4230/LIPIcs.ITCS.2026.5},
  annote =	{Keywords: Fault tolerance, Data structures, Minimum cuts, Maximum flows}
}
Document
DOI: 10.4230/LIPIcs.ITCS.2026.107
New Greedy Spanners and Applications

Authors: Elizaveta Popova and Elad Tzalik

Published in: LIPIcs, Volume 362, 17th Innovations in Theoretical Computer Science Conference (ITCS 2026)

Abstract
We present a simple greedy procedure to compute an (α,β)-spanner for a graph G. We then show that this procedure is useful for building fault-tolerant spanners, as well as spanners for weighted graphs. Our first main result is an algorithm that, given a multigraph G, outputs an f edge fault-tolerant (k,k-1)-spanner H of size O(fn^{1+1/k}) which is tight. To our knowledge, this is the first tight result concerning the price of fault tolerance in spanners which are not multiplicative, in any model of faults. Our second main result is a new construction of a spanner for weighted graphs. We show that any weighted graph G has a subgraph H with O(n^{1+1/k}) edges such that any path P of hop-length 𝓁 in G has a replacement path P' in H of weighted length ≤ w(P)+(2k-2)w^(1/2)(P) where w(P) is the total edge weight of P, and w^(1/2) denotes the sum of the largest ⌈𝓁/2⌉ edge weights along P. Moreover, we show such approximation is optimal for shortest paths of hop-length 2. To our knowledge, this is the first construction of a "spanner" for weighted graphs that strictly improves upon the stretch of multiplicative (2k-1)-spanners for all non-adjacent vertex pairs, while maintaining the same size bound. Our technique is based on using clustering and ball-growing, which are methods commonly used in designing spanner algorithms, to analyze simple greedy algorithms. This allows us to combine the flexibility of clustering approaches with the unique properties of the greedy algorithm to get improved bounds. In particular, our methods give a very short proof that the parallel greedy spanner adds O(kn^{1+1/k}) edges, improving upon known bounds.
Cite as

Elizaveta Popova and Elad Tzalik. New Greedy Spanners and Applications. In 17th Innovations in Theoretical Computer Science Conference (ITCS 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 362, pp. 107:1-107:25, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{popova_et_al:LIPIcs.ITCS.2026.107,
  author =	{Popova, Elizaveta and Tzalik, Elad},
  title =	{{New Greedy Spanners and Applications}},
  booktitle =	{17th Innovations in Theoretical Computer Science Conference (ITCS 2026)},
  pages =	{107:1--107:25},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-410-9},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{362},
  editor =	{Saraf, Shubhangi},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ITCS.2026.107},
  URN =		{urn:nbn:de:0030-drops-253945},
  doi =		{10.4230/LIPIcs.ITCS.2026.107},
  annote =	{Keywords: Graph Spanners, Greedy Algorithms}
}
Document
DOI: 10.4230/LIPIcs.ISAAC.2025.43
New Approximate Distance Oracles and Their Applications

Authors: Avi Kadria and Liam Roditty

Published in: LIPIcs, Volume 359, 36th International Symposium on Algorithms and Computation (ISAAC 2025)

Abstract
Let G = (V, E) be an undirected graph with n vertices and m edges, and let μ = m/n. A distance oracle is a data structure designed to answer approximate distance queries, with the goal of achieving low stretch, efficient space usage, and fast query time. While much of the prior work focused on distance oracles with constant query time, this paper presents a comprehensive study of distance oracles with non-constant query time. We explore the tradeoffs between space, stretch, and query time of distance oracles in various regimes. Specifically, we consider both weighted and unweighted graphs in the regimes of stretch < 2 and stretch ≥ 2. In addition, we demonstrate several applications of our new distance oracles to the n-Pairs Shortest Paths (n-PSP) problem and the All Nodes Shortest Cycles (ANSC) problem. Our main contributions are: - Weighted graphs: We present a new three-way trade-off between stretch, space, and query time, offering a natural extension of the classical Thorup–Zwick distance oracle [STOC’01 and JACM’05] to regimes with larger query time. Specifically, for any 0 < r < 1/2 and integer k ≥ 1, we construct a (2k(1 - 2r) - 1)-stretch distance oracle with Õ(m + n^{1 + 1/k}) space and Õ(μ n^r) query time. This construction provides an asymptotic improvement over the classical (2k - 1)-stretch and O(n^{1 + 1/k})-space tradeoff of Thorup and Zwick in sparse graphs, at the cost of increased query time. We also improve upon a result of Dalirrooyfard et al. [FOCS’22], who presented a (2k - 2)-stretch distance oracle with O(m + n^{1 + 1/k}) space and O(μ n^{1/k}) query time. In our oracle we reduce the stretch from (2k - 2) to (2k - 5) while preserving the same space and query time. - Unweighted graphs: We present a (2k - 5, 4 + 2_{odd})-approximation distance oracle with O(n^{1 + 1/k}) space and O(n^{1/k}) query time. This improves upon a (2k - 2, 2_{odd})-approximation distance oracle of Dalirrooyfard et al. [FOCS’22] while maintaining the same space and query time. We also present a distance oracle that given u,v ∈ V returns an estimate d̂(u,v) ≤ d(u,v) + 2⌈ d(u,v) / 3 ⌉ + 2, using O(n^{4/3 + 2ε}) space and O(n^{1 - 3ε}) query time. To the best of our knowledge, this is the first distance oracle that simultaneously achieves a multiplicative stretch < 2, and a space complexity O(n^{1.5 - α}), for some α > 0. - Applications for n-PSP and ANSC: We present an Õ(m^{1 - 1/(k+1)} n)-time algorithm for the n-PSP problem, that for every input pair ⟨s_i,t_i⟩, where i ∈ [n], returns an estimate d̂(s_i, t_i) such that d̂(s_i,t_i) ≤ d(s_i,t_i) + 2⌈d(s_i,t_i)/2k⌉. By allowing a small additive error, this result circumvents the conditional running time lower bound of Ω(m^{2 - 2/(k+1)} ⋅ n^{1/(k+1) - o(1)}), established by Dalirrooyfard et al. [FOCS’22] for achieving (1 + 1/k)-stretch. Additionally, we present an Õ(mn^{1 - 1/k})-time algorithm for the ANSC problem that computes, for every u ∈ V, an estimate ĉ_u such that ĉ_u ≤ SC(u) + 2⌈SC(u)/2(k - 1)⌉, where SC(u) denotes the length of the shortest cycle containing u. This improves upon the Õ(m^{2 - 2/k}n^{1/k})-time algorithm of Dalirrooyfard et al. [FOCS'22], while achieving the same approximation guarantee. We obtain our results by developing several new techniques, among them are the borderline vertices technique and the middle vertex technique, which may be of independent interest.
Cite as

Avi Kadria and Liam Roditty. New Approximate Distance Oracles and Their Applications. In 36th International Symposium on Algorithms and Computation (ISAAC 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 359, pp. 43:1-43:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{kadria_et_al:LIPIcs.ISAAC.2025.43,
  author =	{Kadria, Avi and Roditty, Liam},
  title =	{{New Approximate Distance Oracles and Their Applications}},
  booktitle =	{36th International Symposium on Algorithms and Computation (ISAAC 2025)},
  pages =	{43:1--43:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-408-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{359},
  editor =	{Chen, Ho-Lin and Hon, Wing-Kai and Tsai, Meng-Tsung},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ISAAC.2025.43},
  URN =		{urn:nbn:de:0030-drops-249514},
  doi =		{10.4230/LIPIcs.ISAAC.2025.43},
  annote =	{Keywords: Distance oracles, Fine-grained algorithms, Graph algorithms, Data structures}
}
Document
DOI: 10.4230/LIPIcs.ISAAC.2025.19
Traffic-Oblivious Multi-Commodity Flow Network Design

Authors: Markus Chimani and Max Ilsen

Published in: LIPIcs, Volume 359, 36th International Symposium on Algorithms and Computation (ISAAC 2025)

Abstract
We consider the Minimum Multi-Commodity Flow Subgraph (MMCFS) problem: given a directed graph G with edge capacities cap and a retention ratio α ∈ (0,1), find an edge-wise minimum subgraph G' ⊆ G such that for all traffic matrices T routable in G using a multi-commodity flow, α⋅ T is routable in G'. This natural yet novel problem is motivated by recent research that investigates how the power consumption in backbone computer networks can be reduced by turning off connections during times of low demand without compromising the quality of service. Since the actual traffic demands are generally not known beforehand, our approach must be traffic-oblivious, i.e., work for all possible sets of simultaneously routable traffic demands in the original network. In this paper we present the problem, relate it to other known problems in literature, and show several structural results, including a reformulation, maximum possible deviations from the optimum, and NP-hardness (as well as a certain inapproximability) already on very restricted instances. The most significant contribution is a max(1/α, 2)-approximation based on a surprisingly simple LP-rounding scheme. We also give instances where this worst-case approximation ratio is met and thus prove that our analysis is tight.
Cite as

Markus Chimani and Max Ilsen. Traffic-Oblivious Multi-Commodity Flow Network Design. In 36th International Symposium on Algorithms and Computation (ISAAC 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 359, pp. 19:1-19:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{chimani_et_al:LIPIcs.ISAAC.2025.19,
  author =	{Chimani, Markus and Ilsen, Max},
  title =	{{Traffic-Oblivious Multi-Commodity Flow Network Design}},
  booktitle =	{36th International Symposium on Algorithms and Computation (ISAAC 2025)},
  pages =	{19:1--19:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-408-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{359},
  editor =	{Chen, Ho-Lin and Hon, Wing-Kai and Tsai, Meng-Tsung},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ISAAC.2025.19},
  URN =		{urn:nbn:de:0030-drops-249273},
  doi =		{10.4230/LIPIcs.ISAAC.2025.19},
  annote =	{Keywords: Multi-commodity flow, Digraphs, LP-rounding, Approximation algorithm}
}
Document
Invited Talk
DOI: 10.4230/LIPIcs.ESA.2025.1
Graph Decompositions and Length-Constrained Expanders (Invited Talk)

Authors: Bernhard Haeupler

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
Graph decompositions are powerful algorithmic tools with wide applications to graph structures (e.g., spanners, hopsets, sparsifiers, oblivious routings, etc.) and network optimization algorithms, including parallel, distributed and dynamic algorithms for flow and distance problems. Classical graph decompositions include - low-diameter decomposition, which captures 𝓁_1-quantities like lengths and costs, and - expander decomposition, which captures 𝓁_∞-quantities like flows and congestion. This keynote starts with a brief survey of these classical decompositions, then presents length-constrained expanders and length-constrained expander decompositions - a recent and technically rich generalization that simultaneously controls length and congestion (𝓁_1 & 𝓁_∞). Length-constrained expander decompositions significantly broaden and extend the range of applications for graph decompositions, and this talk will discuss several examples and ways to leverage their power.
Cite as

Bernhard Haeupler. Graph Decompositions and Length-Constrained Expanders (Invited Talk). In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 1:1-1:2, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{haeupler:LIPIcs.ESA.2025.1,
  author =	{Haeupler, Bernhard},
  title =	{{Graph Decompositions and Length-Constrained Expanders}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{1:1--1:2},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.1},
  URN =		{urn:nbn:de:0030-drops-244699},
  doi =		{10.4230/LIPIcs.ESA.2025.1},
  annote =	{Keywords: Length-Constrained Expanders, Graph Decomposition, Network Optimization Algorithms}
}
Document
DOI: 10.4230/LIPIcs.ESA.2025.107
Length-Constrained Directed Expander Decomposition and Length-Constrained Vertex-Capacitated Flow Shortcuts

Authors: Bernhard Haeupler, Yaowei Long, Thatchaphol Saranurak, and Shengzhe Wang

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
We show the existence of length-constrained expander decomposition in directed graphs and undirected vertex-capacitated graphs. Previously, its existence was shown only in undirected edge-capacitated graphs [Bernhard Haeupler et al., 2022; Haeupler et al., 2024]. Along the way, we prove the multi-commodity maxflow-mincut theorems for length-constrained expansion in both directed and undirected vertex-capacitated graphs. Based on our decomposition, we build a length-constrained flow shortcut for undirected vertex-capacitated graphs, which roughly speaking is a set of edges and vertices added to the graph so that every multi-commodity flow demand can be routed with approximately the same vertex-congestion and length, but all flow paths only contain few edges. This generalizes the shortcut for undirected edge-capacitated graphs from [Bernhard Haeupler et al., 2024]. Length-constrained expander decomposition and flow shortcuts have been crucial in the recent algorithms in undirected edge-capacitated graphs [Bernhard Haeupler et al., 2024; Haeupler et al., 2024]. Our work thus serves as a foundation to generalize these concepts to directed and vertex-capacitated graphs.
Cite as

Bernhard Haeupler, Yaowei Long, Thatchaphol Saranurak, and Shengzhe Wang. Length-Constrained Directed Expander Decomposition and Length-Constrained Vertex-Capacitated Flow Shortcuts. In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 107:1-107:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{haeupler_et_al:LIPIcs.ESA.2025.107,
  author =	{Haeupler, Bernhard and Long, Yaowei and Saranurak, Thatchaphol and Wang, Shengzhe},
  title =	{{Length-Constrained Directed Expander Decomposition and Length-Constrained Vertex-Capacitated Flow Shortcuts}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{107:1--107:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.107},
  URN =		{urn:nbn:de:0030-drops-245765},
  doi =		{10.4230/LIPIcs.ESA.2025.107},
  annote =	{Keywords: Length-Constrained Expander, Expander Decomposition, Shortcut}
}
Document
APPROX
DOI: 10.4230/LIPIcs.APPROX/RANDOM.2025.4
Streaming Algorithms for Network Design

Authors: Chandra Chekuri, Rhea Jain, Sepideh Mahabadi, and Ali Vakilian

Published in: LIPIcs, Volume 353, Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025)

Abstract
We consider the Survivable Network Design problem (SNDP) in the single-pass insertion-only streaming model. The input to SNDP is an edge-weighted graph G = (V, E) and an integer connectivity requirement r(uv) for each u, v ∈ V. The objective is to find a minimum-weight subgraph H ⊆ G such that, for every pair of vertices u, v ∈ V, u and v are r(uv)-edge/vertex-connected. Recent work by [Ce Jin et al., 2024] obtained approximation algorithms for edge-connectivity augmentation, and via that, also derived algorithms for edge-connectivity SNDP (EC-SNDP). In this work we consider vertex-connectivity setting (VC-SNDP) and obtain several results for it as well as improved results for EC-SNDP. - We provide a general framework for solving connectivity problems including SNDP and others in streaming; this is based on a connection to fault-tolerant spanners. For VC-SNDP we provide an O(tk)-approximation in Õ(k^{1-1/t}n^{1 + 1/t}) space, where k is the maximum connectivity requirement, assuming an exact algorithm at the end of the stream. Using a refined LP-based analysis, we provide an O(β t)-approximation where β is the integrality gap of the natural cut-based LP relaxation. These are the first approximation algorithms in the streaming model for VC-SNDP. When applied to the EC-SNDP, our framework provides an O(t)-approximation in Õ(k^{1/2-1/(2t)}n^{1 + 1/t} + kn) space, improving the O(t log k)-approximation of [Ce Jin et al., 2024] using Õ(kn^{1+1/t}) space; this also extends to element-connectivity SNDP. - We consider vertex connectivity-augmentation in the link-arrival model. The input is a k-vertex-connected spanning subgraph G, and additional weighted links L arrive in the stream; the goal is to store the min-weight set of links such that G ∪ L is (k+1)-vertex-connected. We obtain constant-factor approximations in near-linear space for k = 1, 2. Our result for k = 2 is based on using the SPQR tree, a novel application for this well-known representation of 2-connected graphs.
Cite as

Chandra Chekuri, Rhea Jain, Sepideh Mahabadi, and Ali Vakilian. Streaming Algorithms for Network Design. In Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 353, pp. 4:1-4:23, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{chekuri_et_al:LIPIcs.APPROX/RANDOM.2025.4,
  author =	{Chekuri, Chandra and Jain, Rhea and Mahabadi, Sepideh and Vakilian, Ali},
  title =	{{Streaming Algorithms for Network Design}},
  booktitle =	{Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025)},
  pages =	{4:1--4:23},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-397-3},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{353},
  editor =	{Ene, Alina and Chattopadhyay, Eshan},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.APPROX/RANDOM.2025.4},
  URN =		{urn:nbn:de:0030-drops-243709},
  doi =		{10.4230/LIPIcs.APPROX/RANDOM.2025.4},
  annote =	{Keywords: Streaming Algorithms, Survivable Network Design, Fault-Tolerant Spanners}
}
Document
APPROX
DOI: 10.4230/LIPIcs.APPROX/RANDOM.2025.22
Directed Buy-At-Bulk Spanners

Authors: Elena Grigorescu, Nithish Kumar, and Young-San Lin

Published in: LIPIcs, Volume 353, Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025)

Abstract
We present a framework that unifies directed buy-at-bulk network design and directed spanner problems, namely, buy-at-bulk spanners. The goal is to find a minimum-cost routing solution for network design problems that captures economies at scale, while satisfying demands and distance constraints for terminal pairs. A more restricted version of this problem was shown to be O(2^{log^{1-ε} n})-hard to approximate, where n is the number of vertices, under a standard complexity assumption, by Elkin and Peleg (Theory of Computing Systems, 2007). Our results for buy-at-bulk spanners are the following. - When the edge lengths are integral with magnitude polynomial in n we present: 1) An Õ(n^{4/5 + ε})-approximation polynomial-time randomized algorithm for uniform demands. 2) An Õ(k^{1/2 + ε})-approximation polynomial-time randomized algorithm for general demands, where k is the number of terminal pairs. This can be improved to an Õ(k^{ε})-approximation algorithm for the single-source problem. The same approximation ratios hold in the online setting. - When the edge lengths are rational and well-conditioned, we present an Õ(k^{1/2 + ε})-approximation polynomial-time randomized algorithm that may slightly violate the distance constraints. The result can be improved to an Õ(k^ε)-approximation algorithm for the single-source problem. The same approximation ratios hold for the online setting when the condition number is given in advance. To the best of our knowledge, these are the first sublinear factor approximation algorithms for directed buy-at-bulk spanners. We allow the edge lengths to be negative and the demands to be non-unit, unlike the previous literature. Our approximation ratios match the state-of-the-art ratios in special cases, namely, buy-at-bulk network design by Antonakopoulos (WAOA, 2010) and (online) weighted spanners by Grigorescu, Kumar, and Lin (APPROX 2023). Furthermore, we improve the competitive ratio for online buy-at-bulk by Chakrabarty, Ene, Krishnaswamy, and Panigrahi (SICOMP, 2018) by a factor of log R, where R is the ratio between the maximum demand and the minimum demand.
Cite as

Elena Grigorescu, Nithish Kumar, and Young-San Lin. Directed Buy-At-Bulk Spanners. In Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 353, pp. 22:1-22:24, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{grigorescu_et_al:LIPIcs.APPROX/RANDOM.2025.22,
  author =	{Grigorescu, Elena and Kumar, Nithish and Lin, Young-San},
  title =	{{Directed Buy-At-Bulk Spanners}},
  booktitle =	{Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025)},
  pages =	{22:1--22:24},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-397-3},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{353},
  editor =	{Ene, Alina and Chattopadhyay, Eshan},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.APPROX/RANDOM.2025.22},
  URN =		{urn:nbn:de:0030-drops-243885},
  doi =		{10.4230/LIPIcs.APPROX/RANDOM.2025.22},
  annote =	{Keywords: buy-at-bulk spanners, minimum density junction tree, resource constrained shortest path}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.77
Minimizing Recourse in an Adaptive Balls and Bins Game

Authors: Adi Fine, Haim Kaplan, and Uri Stemmer

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
We consider a simple load-balancing game between an algorithm and an adaptive adversary. In a simplified version of this game, the adversary observes the assignment of jobs to machines and selects a machine to kill. The algorithm must then restart the jobs from the failed machine on other machines. The adversary repeats this process, observing the new assignment and eliminating another machine, and so on. The adversary aims to force the algorithm to perform many restarts, while we seek a robust algorithm that minimizes restarts regardless of the adversary’s strategy. This game was recently introduced by Bhattacharya et al. for designing a 3-spanner with low recourse against an adaptive adversary. We prove that a simple algorithm, which assigns each job to a randomly chosen live bin, incurs O(n log n) recourse against an adaptive adversary. This enables us to construct a much simpler 3-spanner with a recourse that is smaller by a factor of O(log² n) compared to the previous construction, without increasing the update time or the size of the spanner. This motivates a careful examination of the range of attacks an adaptive adversary can deploy against simple algorithms before resorting to more complex ones. As our case study demonstrates, this attack space may not be as large as it initially appears, enabling the development of robust algorithms that are both simpler and easier to analyze.
Cite as

Adi Fine, Haim Kaplan, and Uri Stemmer. Minimizing Recourse in an Adaptive Balls and Bins Game. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 77:1-77:19, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{fine_et_al:LIPIcs.ICALP.2025.77,
  author =	{Fine, Adi and Kaplan, Haim and Stemmer, Uri},
  title =	{{Minimizing Recourse in an Adaptive Balls and Bins Game}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{77:1--77:19},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.77},
  URN =		{urn:nbn:de:0030-drops-234544},
  doi =		{10.4230/LIPIcs.ICALP.2025.77},
  annote =	{Keywords: Adaptive adversary, load-balancing game, balls-and-bins, randomized algorithms, dynamic 3-spanner, dynamic graph algorithms, adversarial robustness}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.32
Light Edge Fault Tolerant Graph Spanners

Authors: Greg Bodwin, Michael Dinitz, Ama Koranteng, and Lily Wang

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
There has recently been significant interest in fault tolerant spanners, which are spanners that still maintain their stretch guarantees after some nodes or edges fail. This work has culminated in an almost complete understanding of the three-way tradeoff between stretch, sparsity, and number of faults tolerated. However, despite some progress in metric settings, there have been no results to date on the tradeoff in general graphs between stretch, lightness, and number of faults tolerated. We initiate the study of light edge fault tolerant (EFT) graph spanners, obtaining the first such results. First, we observe that lightness can be unbounded if we use the traditional definition (normalizing by the MST). We then argue that a natural definition of fault-tolerant lightness is to instead normalize by a min-weight fault tolerant connectivity preserver; essentially, a fault-tolerant version of the MST. However, even with this, we show that it is still not generally possible to construct f-EFT spanners whose weight compares reasonably to the weight of a min-weight f-EFT connectivity preserver. In light of this lower bound, it is natural to then consider bicriteria notions of lightness, where we compare the weight of an f-EFT spanner to a min-weight (f' > f)-EFT connectivity preserver. The most interesting question is to determine the minimum value of f' that allows for reasonable lightness upper bounds. Our main result is a precise answer to this question: f' = 2f. In particular, we show that the lightness can be untenably large (roughly n/k for a k-spanner) if one normalizes by the min-weight (2f-1)-EFT connectivity preserver. But if one normalizes by the min-weight 2f-EFT connectivity preserver, then we show that the lightness is bounded by just O(f^{1/2}) times the non-fault tolerant lightness (roughly n^{1/k} for a (1+ε)(2k-1)-spanner).
Cite as

Greg Bodwin, Michael Dinitz, Ama Koranteng, and Lily Wang. Light Edge Fault Tolerant Graph Spanners. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 32:1-32:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{bodwin_et_al:LIPIcs.ICALP.2025.32,
  author =	{Bodwin, Greg and Dinitz, Michael and Koranteng, Ama and Wang, Lily},
  title =	{{Light Edge Fault Tolerant Graph Spanners}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{32:1--32:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.32},
  URN =		{urn:nbn:de:0030-drops-234093},
  doi =		{10.4230/LIPIcs.ICALP.2025.32},
  annote =	{Keywords: Fault Tolerant Spanners, Light Spanners}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.57
Undirected 3-Fault Replacement Path in Nearly Cubic Time

Authors: Shucheng Chi, Ran Duan, Benyu Wang, and Tianle Xie

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
Given a graph G = (V,E) (n = |V|, m = |E|) and two vertices s,t ∈ V, the f-fault replacement path (fFRP) problem computes for every set F of at most f edges, the distance from s to t when edges in F fail. A recent result shows that 2FRP in directed graphs can be solved in Õ(n³) time [Vassilevska Williams, Woldeghebriel, Xu 2022]. In this paper, we show a 3FRP algorithm in deterministic Õ(n³) time for undirected weighted graphs, which almost matches the size of the output. This implies that fFRP in undirected graphs can be solved in nearly optimal Õ(n^f) time for all f ≥ 3. To construct our 3FRP algorithm, we introduce an incremental distance sensitivity oracle (DSO) for undirected graphs with Õ(n²) worst-case update time, while preprocessing time, space, and query time are still Õ(n³), Õ(n²) and Õ(1), respectively, which match the static DSO [Bernstein and Karger 2009]. Here in a DSO, we can preprocess a graph so that the distance between any pair of vertices given any failed edge can be answered efficiently. From the recent result in [Peng and Rubinstein 2023], we can obtain an offline dynamic DSO from the incremental worst-case DSO, which makes the construction of our 3FRP algorithm more convenient. By the offline dynamic DSO, we can also construct a 2-fault single-source replacement path (2-fault SSRP) algorithm in Õ(n³) time, that is, from a given vertex s, we want to find the distance to any vertex t when any pair of edges fail. Thus the Õ(n³) time complexity for 2-fault SSRP is also nearly optimal. Now we know that in undirected graphs 1FRP can be solved in Õ(m) time [Nardelli, Proietti, Widmayer 2001], and 2FRP and 3FRP in undirected graphs can be solved in Õ(n³) time. In this paper, we also show that a truly subcubic algorithm for 2FRP in undirected weighted graphs does not exist under APSP hypothesis.
Cite as

Shucheng Chi, Ran Duan, Benyu Wang, and Tianle Xie. Undirected 3-Fault Replacement Path in Nearly Cubic Time. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 57:1-57:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{chi_et_al:LIPIcs.ICALP.2025.57,
  author =	{Chi, Shucheng and Duan, Ran and Wang, Benyu and Xie, Tianle},
  title =	{{Undirected 3-Fault Replacement Path in Nearly Cubic Time}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{57:1--57:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.57},
  URN =		{urn:nbn:de:0030-drops-234346},
  doi =		{10.4230/LIPIcs.ICALP.2025.57},
  annote =	{Keywords: Graph Algorithm, Shortest Path, Replacement Path}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.69
Approximation Algorithms for Optimal Hopsets

Authors: Michael Dinitz, Ama Koranteng, and Yasamin Nazari

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
For a given graph G, a hopset H with hopbound β and stretch α is a set of edges such that between every pair of vertices u and v, there is a path with at most β hops in G ∪ H that approximates the distance between u and v up to a multiplicative stretch of α. Hopsets have found a wide range of applications for distance-based problems in various computational models since the 90s. More recently, there has been significant interest in understanding these fundamental objects from an existential and structural perspective. But all of this work takes a worst-case (or existential) point of view: How many edges do we need to add to satisfy a given hopbound and stretch requirement for any input graph? We initiate the study of the natural optimization variant of this problem: given a specific graph instance, what is the minimum number of edges that satisfy the hopbound and stretch requirements? We give approximation algorithms for a generalized hopset problem which, when combined with known existential bounds, lead to different approximation guarantees for various regimes depending on hopbound, stretch, and directed vs. undirected inputs. We complement our upper bounds with a lower bound that implies Label Cover hardness for directed hopsets and shortcut sets with hopbound at least 3.
Cite as

Michael Dinitz, Ama Koranteng, and Yasamin Nazari. Approximation Algorithms for Optimal Hopsets. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 69:1-69:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{dinitz_et_al:LIPIcs.ICALP.2025.69,
  author =	{Dinitz, Michael and Koranteng, Ama and Nazari, Yasamin},
  title =	{{Approximation Algorithms for Optimal Hopsets}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{69:1--69:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.69},
  URN =		{urn:nbn:de:0030-drops-234464},
  doi =		{10.4230/LIPIcs.ICALP.2025.69},
  annote =	{Keywords: Hopsets, Approximation Algorithms}
}
  • Refine by Type
  • 36 Document/PDF
  • 19 Document/HTML

  • Refine by Publication Year
  • 5 2026
  • 15 2025
  • 4 2024
  • 2 2023
  • 1 2022
  • Show More...

  • Refine by Author
  • 15 Bodwin, Greg
  • 4 Choudhary, Keerti
  • 4 Dinitz, Michael
  • 3 Nazari, Yasamin
  • 3 Wein, Nicole
  • Show More...

  • Refine by Series/Journal
  • 36 LIPIcs

  • Refine by Classification
  • 9 Theory of computation → Sparsification and spanners
  • 7 Mathematics of computing → Graph algorithms
  • 6 Theory of computation → Routing and network design problems
  • 4 Theory of computation → Shortest paths
  • 3 Theory of computation → Computational geometry
  • Show More...

  • Refine by Keyword
  • 3 Data structures
  • 3 Fault Tolerance
  • 3 shortest paths
  • 3 spanners
  • 2 Emulators
  • Show More...

Any Issues?
X

Feedback on the Current Page

CAPTCHA

Thanks for your feedback!

Feedback submitted to Dagstuhl Publishing

Could not send message

Please try again later or send an E-mail
© 2023-2026 Schloss Dagstuhl – LZI GmbH Schloss Dagstuhl – LZI GmbH About DROPS Imprint Privacy Contact