17 Search Results for "Halperin, Dan"

Document
RANDOM
DOI: 10.4230/LIPIcs.APPROX/RANDOM.2025.47
Time Lower Bounds for the Metropolis Process and Simulated Annealing

Authors: Zongchen Chen, Dan Mikulincer, Daniel Reichman, and Alexander S. Wein

Published in: LIPIcs, Volume 353, Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025)

Abstract
The Metropolis process (MP) and Simulated Annealing (SA) are stochastic local search heuristics that are often used in solving combinatorial optimization problems. Despite significant interest, there are very few theoretical results regarding the quality of approximation obtained by MP and SA (with polynomially many iterations) for NP-hard optimization problems. We provide rigorous lower bounds for MP and SA with respect to the classical maximum independent set problem when the algorithms are initialized from the empty set. We establish the existence of a family of graphs for which both MP and SA fail to find approximate solutions in polynomial time. More specifically, we show that for any ε ∈ (0,1) there are n-vertex graphs for which the probability SA (when limited to polynomially many iterations) will approximate the optimal solution within ratio Ω(1/n^{1-ε}) is exponentially small. Our lower bounds extend to graphs of constant average degree d, illustrating the failure of MP to achieve an approximation ratio of Ω(log(d)/d) in polynomial time. In some cases, our lower bounds apply even when the temperature is chosen adaptively. Finally, we prove exponential-time lower bounds when the inputs to these algorithms are bipartite graphs, and even trees, which are known to admit polynomial-time algorithms for the independent set problem.
Cite as

Zongchen Chen, Dan Mikulincer, Daniel Reichman, and Alexander S. Wein. Time Lower Bounds for the Metropolis Process and Simulated Annealing. In Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 353, pp. 47:1-47:22, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{chen_et_al:LIPIcs.APPROX/RANDOM.2025.47,
  author =	{Chen, Zongchen and Mikulincer, Dan and Reichman, Daniel and Wein, Alexander S.},
  title =	{{Time Lower Bounds for the Metropolis Process and Simulated Annealing}},
  booktitle =	{Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques (APPROX/RANDOM 2025)},
  pages =	{47:1--47:22},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-397-3},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{353},
  editor =	{Ene, Alina and Chattopadhyay, Eshan},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.APPROX/RANDOM.2025.47},
  URN =		{urn:nbn:de:0030-drops-244138},
  doi =		{10.4230/LIPIcs.APPROX/RANDOM.2025.47},
  annote =	{Keywords: Metropolis Process, Simulated Annealing, Independent Set}
}
Document
DOI: 10.4230/LIPIcs.WADS.2025.20
Routing Few Robots in a Crowded Network

Authors: Argyrios Deligkas, Eduard Eiben, Robert Ganian, Iyad Kanj, Dominik Leko, and M. S. Ramanujan

Published in: LIPIcs, Volume 349, 19th International Symposium on Algorithms and Data Structures (WADS 2025)

Abstract
In Graph Coordinated Motion Planning, we are given a graph G some of whose vertices are occupied by robots, and we are asked to route k marked robots to their destinations while avoiding collisions and without exceeding a given budget 𝓁 on the number of robot moves. We continue the recent investigation of the problem [ICALP 2024], focusing on the parameter k that captures the task of routing a small number of robots in a possibly crowded graph. We prove that the problem is W[1]-hard parameterized by 𝓁 even for k = 1, but fixed-parameter tractable parameterized by k plus the treedepth of G. We complement the latter algorithm with an NP-hardness reduction which shows that both parameters are necessary to achieve tractability.
Cite as

Argyrios Deligkas, Eduard Eiben, Robert Ganian, Iyad Kanj, Dominik Leko, and M. S. Ramanujan. Routing Few Robots in a Crowded Network. In 19th International Symposium on Algorithms and Data Structures (WADS 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 349, pp. 20:1-20:15, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{deligkas_et_al:LIPIcs.WADS.2025.20,
  author =	{Deligkas, Argyrios and Eiben, Eduard and Ganian, Robert and Kanj, Iyad and Leko, Dominik and Ramanujan, M. S.},
  title =	{{Routing Few Robots in a Crowded Network}},
  booktitle =	{19th International Symposium on Algorithms and Data Structures (WADS 2025)},
  pages =	{20:1--20:15},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-398-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{349},
  editor =	{Morin, Pat and Oh, Eunjin},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.WADS.2025.20},
  URN =		{urn:nbn:de:0030-drops-242516},
  doi =		{10.4230/LIPIcs.WADS.2025.20},
  annote =	{Keywords: graph coordinated motion planning, parameterized complexity, treedepth}
}
Document
DOI: 10.4230/LIPIcs.WABI.2025.10
DiVerG: Scalable Distance Index for Validation of Paired-End Alignments in Sequence Graphs

Authors: Ali Ghaffaari, Alexander Schönhuth, and Tobias Marschall

Published in: LIPIcs, Volume 344, 25th International Conference on Algorithms for Bioinformatics (WABI 2025)

Abstract
Determining the distance between two loci within a genomic region is a recurrent operation in various tasks in computational genomics. A notable example of this task arises in paired-end read mapping as a form of validation of distances between multiple alignments. While straightforward for a single genome, graph-based reference structures render the operation considerably more involved. Given the sheer number of such queries in a typical read mapping experiment, an efficient algorithm for answering distance queries is crucial. In this paper, we introduce DiVerG, a compact data structure as well as a fast and scalable algorithm, for constructing distance indexes for general sequence graphs on multi-core CPU and many-core GPU architectures. DiVerG is based on PairG [Jain et al., 2019], but overcomes the limitations of PairG by exploiting the extensive potential for improvements in terms of scalability and space efficiency. As a consequence, DiVerG can process substantially larger datasets, such as whole human genomes, which are unmanageable by PairG. DiVerG offers faster index construction time and consistently faster query time with gains proportional to the size of the underlying compact data structure. We demonstrate that our method performs favorably on multiple real datasets at various scales. DiVerG achieves superior performance over PairG; e.g. resulting to 2.5-4x speed-up in query time, 44-340x smaller index size, and 3-50x faster construction time for the genome graph of the MHC region, as a particularly variable region of the human genome. The implementation is available at: https://github.com/cartoonist/diverg
Cite as

Ali Ghaffaari, Alexander Schönhuth, and Tobias Marschall. DiVerG: Scalable Distance Index for Validation of Paired-End Alignments in Sequence Graphs. In 25th International Conference on Algorithms for Bioinformatics (WABI 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 344, pp. 10:1-10:24, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{ghaffaari_et_al:LIPIcs.WABI.2025.10,
  author =	{Ghaffaari, Ali and Sch\"{o}nhuth, Alexander and Marschall, Tobias},
  title =	{{DiVerG: Scalable Distance Index for Validation of Paired-End Alignments in Sequence Graphs}},
  booktitle =	{25th International Conference on Algorithms for Bioinformatics (WABI 2025)},
  pages =	{10:1--10:24},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-386-7},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{344},
  editor =	{Brejov\'{a}, Bro\v{n}a and Patro, Rob},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.WABI.2025.10},
  URN =		{urn:nbn:de:0030-drops-239369},
  doi =		{10.4230/LIPIcs.WABI.2025.10},
  annote =	{Keywords: Sequence graph, distance index, read mapping, sparse matrix}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.74
Drainability and Fillability of Polyominoes in Diverse Models of Global Control

Authors: Sándor P. Fekete, Peter Kramer, Jan-Marc Reinhardt, Christian Rieck, and Christian Scheffer

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
Tilt models offer intuitive and clean definitions of complex systems in which particles are influenced by global control commands. Despite a wide range of applications, there has been almost no theoretical investigation into the associated issues of filling and draining geometric environments. This is partly because a globally controlled system (i.e., passive matter) exhibits highly complex behavior that cannot be locally restricted. Thus, there is a strong need for theoretical studies that investigate these models both (1) in terms of relative power to each other, and (2) from a complexity theory perspective. In this work, we provide (1) general tools for comparing and contrasting different models of global control, and (2) both complexity and algorithmic results on filling and draining.
Cite as

Sándor P. Fekete, Peter Kramer, Jan-Marc Reinhardt, Christian Rieck, and Christian Scheffer. Drainability and Fillability of Polyominoes in Diverse Models of Global Control. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 74:1-74:19, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{fekete_et_al:LIPIcs.ICALP.2025.74,
  author =	{Fekete, S\'{a}ndor P. and Kramer, Peter and Reinhardt, Jan-Marc and Rieck, Christian and Scheffer, Christian},
  title =	{{Drainability and Fillability of Polyominoes in Diverse Models of Global Control}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{74:1--74:19},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.74},
  URN =		{urn:nbn:de:0030-drops-234518},
  doi =		{10.4230/LIPIcs.ICALP.2025.74},
  annote =	{Keywords: Global control, full Tilt, single Tilt, Fillability, Drainability, Polyominoes, Complexity}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.1
Reconfiguration of Unit Squares and Disks: PSPACE-Hardness in Simple Settings

Authors: Mikkel Abrahamsen, Kevin Buchin, Maike Buchin, Linda Kleist, Maarten Löffler, Lena Schlipf, André Schulz, and Jack Stade

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
We study well-known reconfiguration problems. Given a start and a target configuration of geometric objects in a polygon, we wonder whether we can move the objects from the start configuration to the target configuration while avoiding collisions between the objects and staying within the polygon. Problems of this type have been considered since the early 80s by roboticists and computational geometers. In this paper, we study some of the simplest possible variants where the objects are labeled or unlabeled unit squares or unit disks. In unlabeled reconfiguration, the objects are identical, so that any object is allowed to end at any of the targets positions. In the labeled variant, each object has a designated target position. The results for the labeled variants are direct consequences from our insights on the unlabeled versions. We show that it is PSPACE-hard to decide whether there exists a reconfiguration of (unlabeled/labeled) unit squares even in a simple polygon. Previously, it was only known to be PSPACE-hard in a polygon with holes for both the unlabeled and labeled version [Solovey and Halperin, Int. J. Robotics Res. 2016]. Our proof is based on a result of independent interest, namely that reconfiguration between two satisfying assignments of a formula of Monotone-Planar-3-Sat is also PSPACE-complete. The reduction from reconfiguration of Monotone-Planar-3-Sat to reconfiguration of unit squares extends techniques recently developed to show NP-hardness of packing unit squares in a simple polygon [Abrahamsen and Stade, FOCS 2024]. We also show PSPACE-hardness of reconfiguration of (unlabeled/labeled) unit disks in a polygon with holes. Previously, it was known that unlabeled reconfiguration of disks of two different sizes was PSPACE-hard [Brocken, van der Heijden, Kostitsyna, Lo-Wong and Surtel, FUN 2021].
Cite as

Mikkel Abrahamsen, Kevin Buchin, Maike Buchin, Linda Kleist, Maarten Löffler, Lena Schlipf, André Schulz, and Jack Stade. Reconfiguration of Unit Squares and Disks: PSPACE-Hardness in Simple Settings. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 1:1-1:18, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{abrahamsen_et_al:LIPIcs.SoCG.2025.1,
  author =	{Abrahamsen, Mikkel and Buchin, Kevin and Buchin, Maike and Kleist, Linda and L\"{o}ffler, Maarten and Schlipf, Lena and Schulz, Andr\'{e} and Stade, Jack},
  title =	{{Reconfiguration of Unit Squares and Disks: PSPACE-Hardness in Simple Settings}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{1:1--1:18},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.1},
  URN =		{urn:nbn:de:0030-drops-231539},
  doi =		{10.4230/LIPIcs.SoCG.2025.1},
  annote =	{Keywords: reconfiguration, unit square, unit disk, unlabeled, labeled, simple polygon, polygon}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.5
Optimal Motion Planning for Two Square Robots in a Rectilinear Environment

Authors: Pankaj K. Agarwal, Mark de Berg, Benjamin Holmgren, Alex Steiger, and Martijn Struijs

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
Let W ⊂ ℝ² be a rectilinear polygonal environment (that is, a rectilinear polygon potentially with holes) with a total of n vertices, and let A,B be two robots, each modeled as an axis-aligned unit square, that can move rectilinearly inside W. The goal is to compute an optimal collision-free motion plan π for A and B between a given pair of source and target configurations. We study two variants of this problem and obtain the following results. - Min-Sum: Here the goal is to compute a motion plan that minimizes the sum of the lengths of the paths of the robots. We present an O(n⁴log n)-time algorithm for computing an optimal solution to the min-sum problem. This is the first polynomial-time algorithm to compute an optimal, collision-free motion of two robots amid obstacles in a planar polygonal environment. - Min-Makespan: Here the robots can move with at most unit speed, and the goal is to compute a motion plan that minimizes the maximum time taken by a robot to reach its target location. We prove that the min-makespan variant is NP-hard.
Cite as

Pankaj K. Agarwal, Mark de Berg, Benjamin Holmgren, Alex Steiger, and Martijn Struijs. Optimal Motion Planning for Two Square Robots in a Rectilinear Environment. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 5:1-5:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{agarwal_et_al:LIPIcs.SoCG.2025.5,
  author =	{Agarwal, Pankaj K. and de Berg, Mark and Holmgren, Benjamin and Steiger, Alex and Struijs, Martijn},
  title =	{{Optimal Motion Planning for Two Square Robots in a Rectilinear Environment}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{5:1--5:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.5},
  URN =		{urn:nbn:de:0030-drops-231577},
  doi =		{10.4230/LIPIcs.SoCG.2025.5},
  annote =	{Keywords: Computational geometry, motion planning, multiple robots, rectilinear paths}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.41
Decomposing Multiparameter Persistence Modules

Authors: Tamal K. Dey, Jan Jendrysiak, and Michael Kerber

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
Dey and Xin (J.Appl.Comput.Top., 2022) describe an algorithm to decompose finitely presented multiparameter persistence modules using a matrix reduction algorithm. Their algorithm only works for modules whose generators and relations are distinctly graded. We extend their approach to work on all finitely presented modules and introduce several improvements that lead to significant speed-ups in practice. Our algorithm is fixed-parameter tractable with respect to the maximal number of relations of the same degree and with further optimisation we obtain an O(n³) time algorithm for interval-decomposable modules. In particular, we can decide interval-decomposability in this time. As a by-product to the proofs of correctness we develop a theory of parameter restriction for persistence modules. Our algorithm is implemented as a software library aida, the first to enable the decomposition of large inputs. We show its capabilities via extensive experimental evaluation.
Cite as

Tamal K. Dey, Jan Jendrysiak, and Michael Kerber. Decomposing Multiparameter Persistence Modules. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 41:1-41:19, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{dey_et_al:LIPIcs.SoCG.2025.41,
  author =	{Dey, Tamal K. and Jendrysiak, Jan and Kerber, Michael},
  title =	{{Decomposing Multiparameter Persistence Modules}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{41:1--41:19},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.41},
  URN =		{urn:nbn:de:0030-drops-231939},
  doi =		{10.4230/LIPIcs.SoCG.2025.41},
  annote =	{Keywords: Topological Data Analysis, Multiparameter Persistence Modules, Persistence, Decomposition}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.20
Polynomial-Time Algorithms for Contiguous Art Gallery and Related Problems

Authors: Ahmad Biniaz, Anil Maheshwari, Magnus Christian Ring Merrild, Joseph S. B. Mitchell, Saeed Odak, Valentin Polishchuk, Eliot W. Robson, Casper Moldrup Rysgaard, Jens Kristian Refsgaard Schou, Thomas Shermer, Jack Spalding-Jamieson, Rolf Svenning, and Da Wei Zheng

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
We introduce the contiguous art gallery problem which is to guard the boundary of a simple polygon with a minimum number of guards such that each guard covers exactly one contiguous portion of the boundary. Art gallery problems are often NP-hard. In particular, it is NP-hard to minimize the number of guards to see the boundary of a simple polygon, without the contiguity constraint. This paper is a merge of three concurrent works [Ahmad Biniaz et al., 2024; Magnus Christian Ring Merrild et al., 2024; Eliot W. Robson et al., 2024] each showing that (surprisingly) the contiguous art gallery problem is solvable in polynomial time. The common idea of all three approaches is developing a greedy function that maps a point on the boundary to the furthest point on the boundary so that the contiguous interval along the boundary between them could be guarded by one guard. Repeatedly applying this function immediately leads to an OPT+1 approximation. By studying this greedy algorithm, we present three different approaches that achieve an optimal solution. The first and second approach apply this greedy algorithm from different points on the boundary that could be found in advance or on the fly while traversing along the boundary (respectively). The third approach represents this function as a piecewise linear rational function, which can be reduced to an abstract arc cover problem involving infinite families of arcs. We identify other problems that can be represented by similar functions, and solve them via the third approach. From the combinatorial point of view, we show that any n-vertex polygon can be guarded by at most ⌊(n-2)/2⌋ guards. This bound is tight because there are polygons that require this many guards.
Cite as

Ahmad Biniaz, Anil Maheshwari, Magnus Christian Ring Merrild, Joseph S. B. Mitchell, Saeed Odak, Valentin Polishchuk, Eliot W. Robson, Casper Moldrup Rysgaard, Jens Kristian Refsgaard Schou, Thomas Shermer, Jack Spalding-Jamieson, Rolf Svenning, and Da Wei Zheng. Polynomial-Time Algorithms for Contiguous Art Gallery and Related Problems. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 20:1-20:21, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{biniaz_et_al:LIPIcs.SoCG.2025.20,
  author =	{Biniaz, Ahmad and Maheshwari, Anil and Merrild, Magnus Christian Ring and Mitchell, Joseph S. B. and Odak, Saeed and Polishchuk, Valentin and Robson, Eliot W. and Rysgaard, Casper Moldrup and Schou, Jens Kristian Refsgaard and Shermer, Thomas and Spalding-Jamieson, Jack and Svenning, Rolf and Zheng, Da Wei},
  title =	{{Polynomial-Time Algorithms for Contiguous Art Gallery and Related Problems}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{20:1--20:21},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.20},
  URN =		{urn:nbn:de:0030-drops-231720},
  doi =		{10.4230/LIPIcs.SoCG.2025.20},
  annote =	{Keywords: Art Gallery Problem, Computational Geometry, Combinatorics, Discrete Algorithms}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.44
A Minor-Testing Approach for Coordinated Motion Planning with Sliding Robots

Authors: Eduard Eiben, Robert Ganian, Iyad Kanj, and M. S. Ramanujan

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
We study a variant of the Coordinated Motion Planning problem on undirected graphs, referred to herein as the Coordinated Sliding-Motion Planning (CSMP) problem. In this variant, we are given an undirected graph G, k robots R₁,… ,R_k positioned on distinct vertices of G, p ≤ k distinct destination vertices for robots R₁,… ,R_p, and 𝓁 ∈ ℕ. The problem is to decide if there is a serial schedule of at most 𝓁 moves (i.e., of makespan 𝓁) such that at the end of the schedule each robot with a destination reaches it, where a robot’s move is a free path (unoccupied by any robots) from its current position to an unoccupied vertex. The problem is known to be NP-hard even on full grids. It has been studied in several contexts, including coin movement and reconfiguration problems, with respect to feasibility, complexity, and approximation. Geometric variants of the problem, in which congruent geometric-shape robots (e.g., unit disk/squares) slide or translate in the Euclidean plane, have also been studied extensively. We investigate the parameterized complexity of CSMP with respect to two parameters: the number k of robots and the makespan 𝓁. As our first result, we present a fixed-parameter algorithm for CSMP parameterized by k. For our second result, we present a fixed-parameter algorithm parameterized by 𝓁 for the special case of CSMP in which only a single robot has a destination and the graph is planar. A crucial new ingredient for both of our results is that the solution admits a succinct representation as a small labeled topological minor of the input graph.
Cite as

Eduard Eiben, Robert Ganian, Iyad Kanj, and M. S. Ramanujan. A Minor-Testing Approach for Coordinated Motion Planning with Sliding Robots. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 44:1-44:15, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{eiben_et_al:LIPIcs.SoCG.2025.44,
  author =	{Eiben, Eduard and Ganian, Robert and Kanj, Iyad and Ramanujan, M. S.},
  title =	{{A Minor-Testing Approach for Coordinated Motion Planning with Sliding Robots}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{44:1--44:15},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.44},
  URN =		{urn:nbn:de:0030-drops-231966},
  doi =		{10.4230/LIPIcs.SoCG.2025.44},
  annote =	{Keywords: coordinated motion planning on graphs, parameterized complexity, topological minor testing, planar graphs}
}
Document
DOI: 10.4230/LIPIcs.ICDT.2025.9
Query Languages for Neural Networks

Authors: Martin Grohe, Christoph Standke, Juno Steegmans, and Jan Van den Bussche

Published in: LIPIcs, Volume 328, 28th International Conference on Database Theory (ICDT 2025)

Abstract
We lay the foundations for a database-inspired approach to interpreting and understanding neural network models by querying them using declarative languages. Towards this end we study different query languages, based on first-order logic, that mainly differ in their access to the neural network model. First-order logic over the reals naturally yields a language which views the network as a black box; only the input-output function defined by the network can be queried. This is essentially the approach of constraint query languages. On the other hand, a white-box language can be obtained by viewing the network as a weighted graph, and extending first-order logic with summation over weight terms. The latter approach is essentially an abstraction of SQL . In general, the two approaches are incomparable in expressive power, as we will show. Under natural circumstances, however, the white-box approach can subsume the black-box approach; this is our main result. We prove the result concretely for linear constraint queries over real functions definable by feedforward neural networks with a fixed number of hidden layers and piecewise linear activation functions.
Cite as

Martin Grohe, Christoph Standke, Juno Steegmans, and Jan Van den Bussche. Query Languages for Neural Networks. In 28th International Conference on Database Theory (ICDT 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 328, pp. 9:1-9:18, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{grohe_et_al:LIPIcs.ICDT.2025.9,
  author =	{Grohe, Martin and Standke, Christoph and Steegmans, Juno and Van den Bussche, Jan},
  title =	{{Query Languages for Neural Networks}},
  booktitle =	{28th International Conference on Database Theory (ICDT 2025)},
  pages =	{9:1--9:18},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-364-5},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{328},
  editor =	{Roy, Sudeepa and Kara, Ahmet},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICDT.2025.9},
  URN =		{urn:nbn:de:0030-drops-229508},
  doi =		{10.4230/LIPIcs.ICDT.2025.9},
  annote =	{Keywords: Expressive power of query languages, Machine learning models, languages for interpretability, explainable AI}
}
Document
DOI: 10.4230/LIPIcs.ITCS.2025.58
The Computational Complexity of Factored Graphs

Authors: Shreya Gupta, Boyang Huang, Russell Impagliazzo, Stanley Woo, and Christopher Ye

Published in: LIPIcs, Volume 325, 16th Innovations in Theoretical Computer Science Conference (ITCS 2025)

Abstract
While graphs and abstract data structures can be large and complex, practical instances are often regular or highly structured. If the instance has sufficient structure, we might hope to compress the object into a more succinct representation. An efficient algorithm (with respect to the compressed input size) could then lead to more efficient computations than algorithms taking the explicit, uncompressed object as input. This leads to a natural question: when does knowing the input instance has a more succinct representation make computation easier? We initiate the study of the computational complexity of problems on factored graphs: graphs that are given as a formula of products and unions on smaller graphs. For any graph problem, we define a parameterized version that takes factored graphs as input, parameterized by the number of (smaller) ordinary graphs used to construct the factored graph. In this setting, we characterize the parameterized complexity of several natural graph problems, exhibiting a variety of complexities. We show that a decision version of lexicographically first maximal independent set is XP-complete, and therefore unconditionally not fixed-parameter tractable (FPT). On the other hand, we show that clique counting is FPT. Finally, we show that reachability is XNL-complete. Moreover, XNL is contained in FPT if and only if NL is contained in some fixed polynomial time.
Cite as

Shreya Gupta, Boyang Huang, Russell Impagliazzo, Stanley Woo, and Christopher Ye. The Computational Complexity of Factored Graphs. In 16th Innovations in Theoretical Computer Science Conference (ITCS 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 325, pp. 58:1-58:19, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{gupta_et_al:LIPIcs.ITCS.2025.58,
  author =	{Gupta, Shreya and Huang, Boyang and Impagliazzo, Russell and Woo, Stanley and Ye, Christopher},
  title =	{{The Computational Complexity of Factored Graphs}},
  booktitle =	{16th Innovations in Theoretical Computer Science Conference (ITCS 2025)},
  pages =	{58:1--58:19},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-361-4},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{325},
  editor =	{Meka, Raghu},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ITCS.2025.58},
  URN =		{urn:nbn:de:0030-drops-226865},
  doi =		{10.4230/LIPIcs.ITCS.2025.58},
  annote =	{Keywords: Parameterized Complexity, Fine-grained complexity, Fixed-parameter tractability, Graph algorithms}
}
Document
DOI: 10.4230/LIPIcs.ISAAC.2022.35
Multi-Robot Motion Planning for Unit Discs with Revolving Areas

Authors: Pankaj K. Agarwal, Tzvika Geft, Dan Halperin, and Erin Taylor

Published in: LIPIcs, Volume 248, 33rd International Symposium on Algorithms and Computation (ISAAC 2022)

Abstract
We study the problem of motion planning for a collection of n labeled unit disc robots in a polygonal environment. We assume that the robots have revolving areas around their start and final positions: that each start and each final is contained in a radius 2 disc lying in the free space, not necessarily concentric with the start or final position, which is free from other start or final positions. This assumption allows a weakly-monotone motion plan, in which robots move according to an ordering as follows: during the turn of a robot R in the ordering, it moves fully from its start to final position, while other robots do not leave their revolving areas. As R passes through a revolving area, a robot R' that is inside this area may move within the revolving area to avoid a collision. Notwithstanding the existence of a motion plan, we show that minimizing the total traveled distance in this setting, specifically even when the motion plan is restricted to be weakly-monotone, is APX-hard, ruling out any polynomial-time (1+ε)-approximation algorithm. On the positive side, we present the first constant-factor approximation algorithm for computing a feasible weakly-monotone motion plan. The total distance traveled by the robots is within an O(1) factor of that of the optimal motion plan, which need not be weakly monotone. Our algorithm extends to an online setting in which the polygonal environment is fixed but the initial and final positions of robots are specified in an online manner. Finally, we observe that the overhead in the overall cost that we add while editing the paths to avoid robot-robot collision can vary significantly depending on the ordering we chose. Finding the best ordering in this respect is known to be NP-hard, and we provide a polynomial time O(log n log log n)-approximation algorithm for this problem.
Cite as

Pankaj K. Agarwal, Tzvika Geft, Dan Halperin, and Erin Taylor. Multi-Robot Motion Planning for Unit Discs with Revolving Areas. In 33rd International Symposium on Algorithms and Computation (ISAAC 2022). Leibniz International Proceedings in Informatics (LIPIcs), Volume 248, pp. 35:1-35:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2022)

Copy BibTex To Clipboard

@InProceedings{agarwal_et_al:LIPIcs.ISAAC.2022.35,
  author =	{Agarwal, Pankaj K. and Geft, Tzvika and Halperin, Dan and Taylor, Erin},
  title =	{{Multi-Robot Motion Planning for Unit Discs with Revolving Areas}},
  booktitle =	{33rd International Symposium on Algorithms and Computation (ISAAC 2022)},
  pages =	{35:1--35:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-258-7},
  ISSN =	{1868-8969},
  year =	{2022},
  volume =	{248},
  editor =	{Bae, Sang Won and Park, Heejin},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ISAAC.2022.35},
  URN =		{urn:nbn:de:0030-drops-173204},
  doi =		{10.4230/LIPIcs.ISAAC.2022.35},
  annote =	{Keywords: motion planning, optimal motion planning, approximation, complexity, NP-hardness}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2022.12
Unlabeled Multi-Robot Motion Planning with Tighter Separation Bounds

Authors: Bahareh Banyassady, Mark de Berg, Karl Bringmann, Kevin Buchin, Henning Fernau, Dan Halperin, Irina Kostitsyna, Yoshio Okamoto, and Stijn Slot

Published in: LIPIcs, Volume 224, 38th International Symposium on Computational Geometry (SoCG 2022)

Abstract
We consider the unlabeled motion-planning problem of m unit-disc robots moving in a simple polygonal workspace of n edges. The goal is to find a motion plan that moves the robots to a given set of m target positions. For the unlabeled variant, it does not matter which robot reaches which target position as long as all target positions are occupied in the end. If the workspace has narrow passages such that the robots cannot fit through them, then the free configuration space, representing all possible unobstructed positions of the robots, will consist of multiple connected components. Even if in each component of the free space the number of targets matches the number of start positions, the motion-planning problem does not always have a solution when the robots and their targets are positioned very densely. In this paper, we prove tight bounds on how much separation between start and target positions is necessary to always guarantee a solution. Moreover, we describe an algorithm that always finds a solution in time O(n log n + mn + m²) if the separation bounds are met. Specifically, we prove that the following separation is sufficient: any two start positions are at least distance 4 apart, any two target positions are at least distance 4 apart, and any pair of a start and a target positions is at least distance 3 apart. We further show that when the free space consists of a single connected component, the separation between start and target positions is not necessary.
Cite as

Bahareh Banyassady, Mark de Berg, Karl Bringmann, Kevin Buchin, Henning Fernau, Dan Halperin, Irina Kostitsyna, Yoshio Okamoto, and Stijn Slot. Unlabeled Multi-Robot Motion Planning with Tighter Separation Bounds. In 38th International Symposium on Computational Geometry (SoCG 2022). Leibniz International Proceedings in Informatics (LIPIcs), Volume 224, pp. 12:1-12:16, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2022)

Copy BibTex To Clipboard

@InProceedings{banyassady_et_al:LIPIcs.SoCG.2022.12,
  author =	{Banyassady, Bahareh and de Berg, Mark and Bringmann, Karl and Buchin, Kevin and Fernau, Henning and Halperin, Dan and Kostitsyna, Irina and Okamoto, Yoshio and Slot, Stijn},
  title =	{{Unlabeled Multi-Robot Motion Planning with Tighter Separation Bounds}},
  booktitle =	{38th International Symposium on Computational Geometry (SoCG 2022)},
  pages =	{12:1--12:16},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-227-3},
  ISSN =	{1868-8969},
  year =	{2022},
  volume =	{224},
  editor =	{Goaoc, Xavier and Kerber, Michael},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2022.12},
  URN =		{urn:nbn:de:0030-drops-160203},
  doi =		{10.4230/LIPIcs.SoCG.2022.12},
  annote =	{Keywords: motion planning, computational geometry, simple polygon}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2021.41
Throwing a Sofa Through the Window

Authors: Dan Halperin, Micha Sharir, and Itay Yehuda

Published in: LIPIcs, Volume 189, 37th International Symposium on Computational Geometry (SoCG 2021)

Abstract
We study several variants of the problem of moving a convex polytope K, with n edges, in three dimensions through a flat rectangular (and sometimes more general) window. Specifically: ii) We study variants where the motion is restricted to translations only, discuss situations where such a motion can be reduced to sliding (translation in a fixed direction), and present efficient algorithms for those variants, which run in time close to O(n^{8/3}). iii) We consider the case of a gate (an unbounded window with two parallel infinite edges), and show that K can pass through such a window, by any collision-free rigid motion, iff it can slide through it, an observation that leads to an efficient algorithm for this variant too. iv) We consider arbitrary compact convex windows, and show that if K can pass through such a window W (by any motion) then K can slide through a slab of width equal to the diameter of W. v) We show that if a purely translational motion for K through a rectangular window W exists, then K can also slide through W keeping the same orientation as in the translational motion. For a given fixed orientation of K we can determine in linear time whether K can translate (and hence slide) through W keeping the given orientation, and if so plan the motion, also in linear time. vi) We give an example of a polytope that cannot pass through a certain window by translations only, but can do so when rotations are allowed. vii) We study the case of a circular window W, and show that, for the regular tetrahedron K of edge length 1, there are two thresholds 1 > δ₁≈ 0.901388 > δ₂≈ 0.895611, such that (a) K can slide through W if the diameter d of W is ≥ 1, (b) K cannot slide through W but can pass through it by a purely translational motion when δ₁ ≤ d < 1, (c) K cannot pass through W by a purely translational motion but can do it when rotations are allowed when δ₂ ≤ d < δ₁, and (d) K cannot pass through W at all when d < δ₂. viii) Finally, we explore the general setup, where we want to plan a general motion (with all six degrees of freedom) for K through a rectangular window W, and present an efficient algorithm for this problem, with running time close to O(n⁴).
Cite as

Dan Halperin, Micha Sharir, and Itay Yehuda. Throwing a Sofa Through the Window. In 37th International Symposium on Computational Geometry (SoCG 2021). Leibniz International Proceedings in Informatics (LIPIcs), Volume 189, pp. 41:1-41:16, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2021)

Copy BibTex To Clipboard

@InProceedings{halperin_et_al:LIPIcs.SoCG.2021.41,
  author =	{Halperin, Dan and Sharir, Micha and Yehuda, Itay},
  title =	{{Throwing a Sofa Through the Window}},
  booktitle =	{37th International Symposium on Computational Geometry (SoCG 2021)},
  pages =	{41:1--41:16},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-184-9},
  ISSN =	{1868-8969},
  year =	{2021},
  volume =	{189},
  editor =	{Buchin, Kevin and Colin de Verdi\`{e}re, \'{E}ric},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2021.41},
  URN =		{urn:nbn:de:0030-drops-138409},
  doi =		{10.4230/LIPIcs.SoCG.2021.41},
  annote =	{Keywords: Motion planning, Convex polytopes in 3D}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2019.26
Maintaining the Union of Unit Discs Under Insertions with Near-Optimal Overhead

Authors: Pankaj K. Agarwal, Ravid Cohen, Dan Halperin, and Wolfgang Mulzer

Published in: LIPIcs, Volume 129, 35th International Symposium on Computational Geometry (SoCG 2019)

Abstract
We present efficient data structures for problems on unit discs and arcs of their boundary in the plane. (i) We give an output-sensitive algorithm for the dynamic maintenance of the union of n unit discs under insertions in O(k log^2 n) update time and O(n) space, where k is the combinatorial complexity of the structural change in the union due to the insertion of the new disc. (ii) As part of the solution of (i) we devise a fully dynamic data structure for the maintenance of lower envelopes of pseudo-lines, which we believe is of independent interest. The structure has O(log^2 n) update time and O(log n) vertical ray shooting query time. To achieve this performance, we devise a new algorithm for finding the intersection between two lower envelopes of pseudo-lines in O(log n) time, using tentative binary search; the lower envelopes are special in that at x=-infty any pseudo-line contributing to the first envelope lies below every pseudo-line contributing to the second envelope. (iii) We also present a dynamic range searching structure for a set of circular arcs of unit radius (not necessarily on the boundary of the union of the corresponding discs), where the ranges are unit discs, with O(n log n) preprocessing time, O(n^{1/2+epsilon} + l) query time and O(log^2 n) amortized update time, where l is the size of the output and for any epsilon>0. The structure requires O(n) storage space.
Cite as

Pankaj K. Agarwal, Ravid Cohen, Dan Halperin, and Wolfgang Mulzer. Maintaining the Union of Unit Discs Under Insertions with Near-Optimal Overhead. In 35th International Symposium on Computational Geometry (SoCG 2019). Leibniz International Proceedings in Informatics (LIPIcs), Volume 129, pp. 26:1-26:15, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2019)

Copy BibTex To Clipboard

@InProceedings{agarwal_et_al:LIPIcs.SoCG.2019.26,
  author =	{Agarwal, Pankaj K. and Cohen, Ravid and Halperin, Dan and Mulzer, Wolfgang},
  title =	{{Maintaining the Union of Unit Discs Under Insertions with Near-Optimal Overhead}},
  booktitle =	{35th International Symposium on Computational Geometry (SoCG 2019)},
  pages =	{26:1--26:15},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-104-7},
  ISSN =	{1868-8969},
  year =	{2019},
  volume =	{129},
  editor =	{Barequet, Gill and Wang, Yusu},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2019.26},
  URN =		{urn:nbn:de:0030-drops-104307},
  doi =		{10.4230/LIPIcs.SoCG.2019.26},
  annote =	{Keywords: lower envelopes, pseudo-lines, unit discs, range search, dynamic algorithms, tentative binary search}
}
  • Refine by Type
  • 17 Document/PDF
  • 11 Document/HTML

  • Refine by Publication Year
  • 11 2025
  • 2 2022
  • 1 2021
  • 1 2019
  • 1 2016
  • Show More...

  • Refine by Author
  • 6 Halperin, Dan
  • 3 Agarwal, Pankaj K.
  • 2 Buchin, Kevin
  • 2 Eiben, Eduard
  • 2 Ganian, Robert
  • Show More...

  • Refine by Series/Journal
  • 16 LIPIcs
  • 1 DagSemRep

  • Refine by Classification
  • 7 Theory of computation → Computational geometry
  • 2 Theory of computation → Complexity classes
  • 2 Theory of computation → Complexity theory and logic
  • 2 Theory of computation → Design and analysis of algorithms
  • 2 Theory of computation → Parameterized complexity and exact algorithms
  • Show More...

  • Refine by Keyword
  • 3 motion planning
  • 2 Computational geometry
  • 2 parameterized complexity
  • 2 simple polygon
  • 1 Art Gallery Problem
  • Show More...

Any Issues?
X

Feedback on the Current Page

CAPTCHA

Thanks for your feedback!

Feedback submitted to Dagstuhl Publishing

Could not send message

Please try again later or send an E-mail
© 2023-2025 Schloss Dagstuhl – LZI GmbH About DROPS Imprint Privacy Contact