20 Search Results for "Sacristán, Vera"

Document
DOI: 10.4230/LIPIcs.SoCG.2026.35
On Computing the (Exact) Fréchet Distance with a Frog

Authors: Jacobus Conradi, Ivor van der Hoog, and Eva Rotenberg

Published in: LIPIcs, Volume 367, 42nd International Symposium on Computational Geometry (SoCG 2026)

Abstract
The continuous Fréchet distance 𝒟_F(π,σ) between two polygonal curves π and σ is classically computed by exploring the free space diagram over the two curves. [SoCG'25] recently proposed a radically different approach: they approximate 𝒟_F(π,σ) by computing paths in a discrete graph that models a joint traversal of π and σ, recursively bisecting edges until the discrete distance converges to the continuous one. They implement their "frog-based" technique, and claim that it yields substantial practical speedups compared to the state-of-the-art implementations. In this paper, we revisit this technique. We observe that, in its current form, it has three limitations: (i) it does not use exact arithmetic, (ii) its recursive bisection introduces the required monotonicity events to realise the Fréchet distance only in the limit, and (iii) it applies a heuristic simplification technique which is overly conservative. Motivated by theoretical interest, we develop new techniques that guarantee exactness, polynomial-time convergence and near-optimal lossless simplifications. We provide an open-source C++ implementation of our variant. Our primary contribution is an extensive empirical evaluation on a broad, publically available, suite of real-world and synthetic data sets. Among the frog-based variants, exact computation indeed introduces overhead and increases median runtime. Yet, our new approach is often faster in the worst case, worst ten percent, or even the average runtime due to its worst-case convergence guarantees. More surprisingly, the implementation of [SoCG'19] dominates all frog-based implementations in performance - this finding contrasts previously published claims. These results provide a much-needed nuanced perspective on the capabilities and limitations of frog-based techniques: we showcase its theoretical appeal, but highlight its limited practical feasibility.
Cite as

Jacobus Conradi, Ivor van der Hoog, and Eva Rotenberg. On Computing the (Exact) Fréchet Distance with a Frog. In 42nd International Symposium on Computational Geometry (SoCG 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 367, pp. 35:1-35:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{conradi_et_al:LIPIcs.SoCG.2026.35,
  author =	{Conradi, Jacobus and van der Hoog, Ivor and Rotenberg, Eva},
  title =	{{On Computing the (Exact) Fr\'{e}chet Distance with a Frog}},
  booktitle =	{42nd International Symposium on Computational Geometry (SoCG 2026)},
  pages =	{35:1--35:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-418-5},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{367},
  editor =	{Ahn, Hee-Kap and Hoffmann, Michael and Nayyeri, Amir},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2026.35},
  URN =		{urn:nbn:de:0030-drops-258414},
  doi =		{10.4230/LIPIcs.SoCG.2026.35},
  annote =	{Keywords: Algorithms engineering, Fr\'{e}chet distance}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2026.43
Unlabeled Multi-Robot Motion Planning with Improved Separation Trade-Offs

Authors: Tsuri Farhana, Omrit Filtser, and Shalev Goldshtein

Published in: LIPIcs, Volume 367, 42nd International Symposium on Computational Geometry (SoCG 2026)

Abstract
We study unlabeled multi-robot motion planning for unit-disk robots in a polygonal environment. Although the problem is hard in general, polynomial-time solutions exist under appropriate separation assumptions on start and target positions. Solovey et al. (RSS'15) provide a near-optimal solution assuming that start/target positions must have pairwise distance at least 4, and at least √5≈2.236 from obstacles. This raises the question of whether polynomial-time algorithms can be obtained in even more densely packed environments. In this paper we present a generalized algorithm that achieve different trade-offs on the robots-separation and obstacles-separation bounds, all significantly improving upon the state of the art. Specifically, we obtain polynomial-time constant-approximation algorithms to minimize the total path length when (i) the robots-separation is 2 2/3 and the obstacles-separation is 1 2/3, or (ii) the robots-separation is ≈3.291 and the obstacles-separation ≈1.354. Additionally, we introduce a different strategy yielding a polynomial-time solution when the robots-separation is only 2, and the obstacles-separation is 3. Finally, we show that without any robots-separation assumption, obstacles-separation of at least 1.5 may be necessary for a solution to exist.
Cite as

Tsuri Farhana, Omrit Filtser, and Shalev Goldshtein. Unlabeled Multi-Robot Motion Planning with Improved Separation Trade-Offs. In 42nd International Symposium on Computational Geometry (SoCG 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 367, pp. 43:1-43:16, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{farhana_et_al:LIPIcs.SoCG.2026.43,
  author =	{Farhana, Tsuri and Filtser, Omrit and Goldshtein, Shalev},
  title =	{{Unlabeled Multi-Robot Motion Planning with Improved Separation Trade-Offs}},
  booktitle =	{42nd International Symposium on Computational Geometry (SoCG 2026)},
  pages =	{43:1--43:16},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-418-5},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{367},
  editor =	{Ahn, Hee-Kap and Hoffmann, Michael and Nayyeri, Amir},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2026.43},
  URN =		{urn:nbn:de:0030-drops-258495},
  doi =		{10.4230/LIPIcs.SoCG.2026.43},
  annote =	{Keywords: multi-robot motion planning}
}
Document
Media Exposition
DOI: 10.4230/LIPIcs.SoCG.2026.98
Interactive Uniform Floodlight Illumination and Rotating Rays Voronoi Diagrams (Media Exposition)

Authors: Carlos Alegría, Ioannis Mantas, Marko Savić, and Martin Suderland

Published in: LIPIcs, Volume 367, 42nd International Symposium on Computational Geometry (SoCG 2026)

Abstract
Floodlight illumination problems are art-gallery variants, where a target domain needs to be illuminated by guards, each associated with a field of view. The rotating rays Voronoi diagram is a Voronoi diagram with rays as sites under the angular distance. There is a natural connection of this Voronoi structure with the problem of finding the minimum aperture such that a given set of uniform aperture floodlights illuminates a target domain. In this work we present an interactive visualization software for such problems, supporting different angular distances, namely, oriented and unoriented versions, and for different domains, namely, the plane and simple polygons.
Cite as

Carlos Alegría, Ioannis Mantas, Marko Savić, and Martin Suderland. Interactive Uniform Floodlight Illumination and Rotating Rays Voronoi Diagrams (Media Exposition). In 42nd International Symposium on Computational Geometry (SoCG 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 367, pp. 98:1-98:7, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{alegria_et_al:LIPIcs.SoCG.2026.98,
  author =	{Alegr{\'\i}a, Carlos and Mantas, Ioannis and Savi\'{c}, Marko and Suderland, Martin},
  title =	{{Interactive Uniform Floodlight Illumination and Rotating Rays Voronoi Diagrams}},
  booktitle =	{42nd International Symposium on Computational Geometry (SoCG 2026)},
  pages =	{98:1--98:7},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-418-5},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{367},
  editor =	{Ahn, Hee-Kap and Hoffmann, Michael and Nayyeri, Amir},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2026.98},
  URN =		{urn:nbn:de:0030-drops-259048},
  doi =		{10.4230/LIPIcs.SoCG.2026.98},
  annote =	{Keywords: rotating rays Voronoi diagram, oriented angular distance, unoriented angular distance, Brocard angle, floodlight illumination, coverage problems, visualization software}
}
Document
DOI: 10.4230/LIPIcs.ITCS.2026.31
Delaunay Triangulations with Predictions

Authors: Sergio Cabello, Timothy M. Chan, and Panos Giannopoulos

Published in: LIPIcs, Volume 362, 17th Innovations in Theoretical Computer Science Conference (ITCS 2026)

Abstract
We investigate algorithms with predictions in computational geometry, specifically focusing on the basic problem of computing 2D Delaunay triangulations. Given a set P of n points in the plane and a triangulation G that serves as a "prediction" of the Delaunay triangulation, we would like to use G to compute the correct Delaunay triangulation DT(P) more quickly when G is "close" to DT(P). We obtain a variety of results of this type, under different deterministic and probabilistic settings, including the following: 1) Define D to be the number of edges in G that are not in DT(P). We present a deterministic algorithm to compute DT(P) from G in O(n + Dlog³ n) time, and a randomized algorithm in O(n+Dlog n) expected time, the latter of which is optimal in terms of D. 2) Let R be a random subset of the edges of DT(P), where each edge is chosen independently with probability ρ. Suppose G is any triangulation of P that contains R. We present an algorithm to compute DT(P) from G in O(nlog log n + nlog(1/ρ)) time with high probability. 3) Define d_{vio} to be the maximum number of points of P strictly inside the circumcircle of a triangle in G (the number is 0 if G is equal to DT(P)). We present a deterministic algorithm to compute DT(P) from G in O(nlog^*n + nlog d_{vio}) time. We also obtain results in similar settings for related problems such as 2D Euclidean minimum spanning trees, and hope that our work will open up a fruitful line of future research.
Cite as

Sergio Cabello, Timothy M. Chan, and Panos Giannopoulos. Delaunay Triangulations with Predictions. In 17th Innovations in Theoretical Computer Science Conference (ITCS 2026). Leibniz International Proceedings in Informatics (LIPIcs), Volume 362, pp. 31:1-31:23, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2026)

Copy BibTex To Clipboard

@InProceedings{cabello_et_al:LIPIcs.ITCS.2026.31,
  author =	{Cabello, Sergio and Chan, Timothy M. and Giannopoulos, Panos},
  title =	{{Delaunay Triangulations with Predictions}},
  booktitle =	{17th Innovations in Theoretical Computer Science Conference (ITCS 2026)},
  pages =	{31:1--31:23},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-410-9},
  ISSN =	{1868-8969},
  year =	{2026},
  volume =	{362},
  editor =	{Saraf, Shubhangi},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ITCS.2026.31},
  URN =		{urn:nbn:de:0030-drops-253186},
  doi =		{10.4230/LIPIcs.ITCS.2026.31},
  annote =	{Keywords: Delaunay Triangulation, Minimum Spanning Tree, Algorithms with Predictions}
}
Document
DOI: 10.4230/LIPIcs.GD.2025.25
Characterizing and Recognizing Twistedness

Authors: Oswin Aichholzer, Alfredo García, Javier Tejel, Birgit Vogtenhuber, and Alexandra Weinberger

Published in: LIPIcs, Volume 357, 33rd International Symposium on Graph Drawing and Network Visualization (GD 2025)

Abstract
In a simple drawing of a graph, any two edges intersect in at most one point (either a common endpoint or a proper crossing). A simple drawing is generalized twisted if it fulfills certain rather specific constraints on how the edges are drawn. An abstract rotation system of a graph assigns to each vertex a cyclic order of its incident edges. A realizable rotation system is one that admits a simple drawing such that at each vertex, the edges emanate in that cyclic order, and a generalized twisted rotation system can be realized as a generalized twisted drawing. Generalized twisted drawings have initially been introduced to obtain improved bounds on the size of plane substructures in any simple drawing of K_n. They have since gained independent interest due to their surprising properties. However, the definition of generalized twisted drawings is very geometric and drawing-specific. In this paper, we develop characterizations of generalized twisted drawings that enable a purely combinatorial view on these drawings and lead to efficient recognition algorithms. Concretely, we show that for any n ≥ 7, an abstract rotation system of K_n is generalized twisted if and only if all subrotation systems induced by five vertices are generalized twisted. This implies a drawing-independent and concise characterization of generalized twistedness. Besides, the result yields a simple O(n⁵)-time algorithm to decide whether an abstract rotation system is generalized twisted and sheds new light on the structural features of simple drawings. We further develop a characterization via the rotations of a pair of vertices in a drawing, which we then use to derive an O(n²)-time algorithm to decide whether a realizable rotation system is generalized twisted.
Cite as

Oswin Aichholzer, Alfredo García, Javier Tejel, Birgit Vogtenhuber, and Alexandra Weinberger. Characterizing and Recognizing Twistedness. In 33rd International Symposium on Graph Drawing and Network Visualization (GD 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 357, pp. 25:1-25:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{aichholzer_et_al:LIPIcs.GD.2025.25,
  author =	{Aichholzer, Oswin and Garc{\'\i}a, Alfredo and Tejel, Javier and Vogtenhuber, Birgit and Weinberger, Alexandra},
  title =	{{Characterizing and Recognizing Twistedness}},
  booktitle =	{33rd International Symposium on Graph Drawing and Network Visualization (GD 2025)},
  pages =	{25:1--25:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-403-1},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{357},
  editor =	{Dujmovi\'{c}, Vida and Montecchiani, Fabrizio},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.GD.2025.25},
  URN =		{urn:nbn:de:0030-drops-250116},
  doi =		{10.4230/LIPIcs.GD.2025.25},
  annote =	{Keywords: generalized twisted drawings, simple drawings, rotation systems, recognition, combinatorial characterization, efficient algorithms}
}
Document
DOI: 10.4230/LIPIcs.DISC.2025.7
On the Shape Containment Problem Within the Amoebot Model with Reconfigurable Circuits

Authors: Matthias Artmann, Andreas Padalkin, and Christian Scheideler

Published in: LIPIcs, Volume 356, 39th International Symposium on Distributed Computing (DISC 2025)

Abstract
In programmable matter, we consider a large number of tiny, primitive computational entities called particles that run distributed algorithms to control global properties of the particle structure. Shape formation problems, where the particles have to reorganize themselves into a desired shape using basic movement abilities, are particularly interesting. In the related shape containment problem, the particles are given the description of a shape S and have to find maximally scaled representations of S within the initial configuration, without movements. For example, if S is a triangle, they have to identify the largest subsets of particles that already form a triangle. While the shape formation problem is being studied extensively, no attention has been given to the shape containment problem, which may have additional uses besides shape formation, such as detecting structural flaws. In this paper, we consider the shape containment problem within the geometric amoebot model for programmable matter, using its reconfigurable circuit extension to enable the instantaneous transmission of primitive signals on connected subsets of particles. We first prove a lower runtime bound of Ω (√n) synchronous rounds for the general problem, where n is the number of particles. Then, we present simple and efficient primitives for identifying subsets that form the desired shape. Using these primitives, we construct a large class of shapes which we call snowflakes. This class contains, among others, all shapes composed of parallelograms and hexagons, and the class of star convex shapes. Let k be the maximum scale of the considered shape in a given amoebot structure. If the shape is star convex, we solve it within 𝒪 (log² k) rounds. If it is a snowflake but not star convex, we solve it within 𝒪 (√n log n) rounds.
Cite as

Matthias Artmann, Andreas Padalkin, and Christian Scheideler. On the Shape Containment Problem Within the Amoebot Model with Reconfigurable Circuits. In 39th International Symposium on Distributed Computing (DISC 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 356, pp. 7:1-7:22, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{artmann_et_al:LIPIcs.DISC.2025.7,
  author =	{Artmann, Matthias and Padalkin, Andreas and Scheideler, Christian},
  title =	{{On the Shape Containment Problem Within the Amoebot Model with Reconfigurable Circuits}},
  booktitle =	{39th International Symposium on Distributed Computing (DISC 2025)},
  pages =	{7:1--7:22},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-402-4},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{356},
  editor =	{Kowalski, Dariusz R.},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.DISC.2025.7},
  URN =		{urn:nbn:de:0030-drops-248240},
  doi =		{10.4230/LIPIcs.DISC.2025.7},
  annote =	{Keywords: Programmable matter, amoebot model, reconfigurable circuits, shape containment}
}
Document
DOI: 10.4230/LIPIcs.ESA.2025.28
Sliding Squares in Parallel

Authors: Hugo A. Akitaya, Sándor P. Fekete, Peter Kramer, Saba Molaei, Christian Rieck, Frederick Stock, and Tobias Wallner

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
We consider algorithmic problems motivated by modular robotic reconfiguration in the sliding square model, in which we are given n square-shaped modules in a (labeled or unlabeled) start configuration and need to find a schedule of sliding moves to transform it into a desired goal configuration, maintaining connectivity of the configuration at all times. Recent work has aimed at minimizing the total number of moves, resulting in fully sequential schedules that can perform reconfiguration in 𝒪(n²) moves, or 𝒪(nP) for arrangements of bounding box perimeter size P. We provide first results in the sliding square model that exploit parallel motion, performing reconfiguration in worst-case optimal makespan of 𝒪(P). We also provide tight bounds on the complexity of the problem by showing that even deciding the possibility of reconfiguration within makespan 1 is NP-complete in the unlabeled case. In the labeled variant, we note that deciding the same for makespan 2 is NP-complete, while makespan 1 is straightforward.
Cite as

Hugo A. Akitaya, Sándor P. Fekete, Peter Kramer, Saba Molaei, Christian Rieck, Frederick Stock, and Tobias Wallner. Sliding Squares in Parallel. In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 28:1-28:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{a.akitaya_et_al:LIPIcs.ESA.2025.28,
  author =	{A. Akitaya, Hugo and Fekete, S\'{a}ndor P. and Kramer, Peter and Molaei, Saba and Rieck, Christian and Stock, Frederick and Wallner, Tobias},
  title =	{{Sliding Squares in Parallel}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{28:1--28:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.28},
  URN =		{urn:nbn:de:0030-drops-244961},
  doi =		{10.4230/LIPIcs.ESA.2025.28},
  annote =	{Keywords: Sliding squares, parallel motion, reconfigurability, motion planning, multi-agent path finding, makespan, swarm robotics, computational geometry}
}
Document
DOI: 10.4230/LIPIcs.ESA.2025.24
Fréchet Distance in Unweighted Planar Graphs

Authors: Ivor van der Hoog, Thijs van der Horst, Eva Rotenberg, and Lasse Wulf

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
The Fréchet distance is a distance measure between trajectories in ℝ^d or walks in a graph G. Given constant-time shortest path queries, the Discrete Fréchet distance D_G(P, Q) between two walks P and Q can be computed in O(|P|⋅|Q|) time using a dynamic program. Driemel, van der Hoog, and Rotenberg [SoCG'22] show that for weighted planar graphs this approach is likely tight, as there can be no strongly-subquadratic algorithm to compute a 1.01-approximation of D_G(P, Q) unless the Orthogonal Vector Hypothesis (OVH) fails. Such quadratic-time conditional lower bounds are common to many Fréchet distance variants. However, they can be circumvented by assuming that the input comes from some well-behaved class: There exist (1+ε)-approximations, both in weighted graphs and in ℝ^d, that take near-linear time for c-packed or κ-straight walks in the graph. In ℝ^d there also exists a near-linear time algorithm to compute the Fréchet distance whenever all input edges are long compared to the distance. We consider computing the Fréchet distance in unweighted planar graphs. We show that there exist no strongly-subquadratic 1.25-approximations of the discrete Fréchet distance between two disjoint simple paths in an unweighted planar graph in strongly subquadratic time, unless OVH fails. This improves the previous lower bound, both in terms of generality and approximation factor. We subsequently show that adding graph structure circumvents this lower bound: If the graph is a regular tiling with unit-weighted edges, then there exists an Õ((|P|+|Q|)^{1.5})-time algorithm to compute D_G(P, Q). Our result has natural implications in the plane, as it allows us to define a new class of well-behaved curves that facilitate (1+ε)-approximations of their discrete Fréchet distance in subquadratic time.
Cite as

Ivor van der Hoog, Thijs van der Horst, Eva Rotenberg, and Lasse Wulf. Fréchet Distance in Unweighted Planar Graphs. In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 24:1-24:16, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{vanderhoog_et_al:LIPIcs.ESA.2025.24,
  author =	{van der Hoog, Ivor and van der Horst, Thijs and Rotenberg, Eva and Wulf, Lasse},
  title =	{{Fr\'{e}chet Distance in Unweighted Planar Graphs}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{24:1--24:16},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.24},
  URN =		{urn:nbn:de:0030-drops-244924},
  doi =		{10.4230/LIPIcs.ESA.2025.24},
  annote =	{Keywords: Fr\'{e}chet distance, planar graphs, lower bounds, approximation algorithms}
}
Document
DOI: 10.4230/LIPIcs.ESA.2025.12
Subtrajectory Clustering and Coverage Maximization in Cubic Time, or Better

Authors: Jacobus Conradi and Anne Driemel

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
Many application areas collect unstructured trajectory data. In subtrajectory clustering, one is interested to find patterns in this data using a hybrid combination of segmentation and clustering. We analyze two variants of this problem based on the well-known SetCover and CoverageMaximization problems. In both variants the set system is induced by metric balls under the Fréchet distance centered at polygonal curves. Our algorithms focus on improving the running time of the update step of the generic greedy algorithm by means of a careful combination of sweeps through a candidate space. In the first variant, we are given a polygonal curve P of complexity n, distance threshold Δ and complexity bound 𝓁 and the goal is to identify a minimum-size set of center curves 𝒞, where each center curve is of complexity at most 𝓁 and every point p on P is covered. A point p on P is covered if it is part of a subtrajectory π_p of P such that there is a center c ∈ 𝒞 whose Fréchet distance to π_p is at most Δ. We present an approximation algorithm for this problem with a running time of 𝒪((n²𝓁 + √{k_Δ}n^{5/2})log²n), where k_Δ is the size of an optimal solution. The algorithm gives a bicriterial approximation guarantee that relaxes the Fréchet distance threshold by a constant factor and the size of the solution by a factor of 𝒪(log n). The second problem variant asks for the maximum fraction of the input curve P that can be covered using k center curves, where k ≤ n is a parameter to the algorithm. For the second problem variant, our techniques lead to an algorithm with a running time of 𝒪((k+𝓁)n²log²n) and similar approximation guarantees. Note that in both algorithms k,k_Δ ∈ O(n) and hence the running time is cubic, or better if k ≪ n.
Cite as

Jacobus Conradi and Anne Driemel. Subtrajectory Clustering and Coverage Maximization in Cubic Time, or Better. In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 12:1-12:18, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{conradi_et_al:LIPIcs.ESA.2025.12,
  author =	{Conradi, Jacobus and Driemel, Anne},
  title =	{{Subtrajectory Clustering and Coverage Maximization in Cubic Time, or Better}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{12:1--12:18},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.12},
  URN =		{urn:nbn:de:0030-drops-244806},
  doi =		{10.4230/LIPIcs.ESA.2025.12},
  annote =	{Keywords: Clustering, Set cover, Fr\'{e}chet distance, Approximation algorithms}
}
Document
DOI: 10.4230/LIPIcs.ESA.2025.84
Property Testing of Curve Similarity

Authors: Peyman Afshani, Maike Buchin, Anne Driemel, Marena Richter, and Sampson Wong

Published in: LIPIcs, Volume 351, 33rd Annual European Symposium on Algorithms (ESA 2025)

Abstract
We propose sublinear algorithms for probabilistic testing of the discrete and continuous Fréchet distance - a standard similarity measure for curves. We assume the algorithm is given access to the input curves via a query oracle: a query returns the set of vertices of the curve that lie within a radius δ of a specified vertex of the other curve. The goal is to use a small number of queries to determine with constant probability whether the two curves are similar (i.e., their discrete Fréchet distance is at most δ) or they are "ε-far" (for 0 < ε < 2) from being similar, i.e., more than an ε-fraction of the two curves must be ignored for them to become similar. We present two algorithms which are sublinear assuming that the curves are t-approximate shortest paths in the ambient metric space, for some t ≪ n. The first algorithm uses O(t/ε log t/ε) queries and is given the value of t in advance. The second algorithm does not have explicit knowledge of the value of t and therefore needs to gain implicit knowledge of the straightness of the input curves through its queries. We show that the discrete Fréchet distance can still be tested using roughly O({t³+t² log n}/ε) queries ignoring logarithmic factors in t. Our algorithms work in a matrix representation of the input and may be of independent interest to matrix testing. Our algorithms use a mild uniform sampling condition that constrains the edge lengths of the curves, similar to a polynomially bounded aspect ratio. Applied to testing the continuous Fréchet distance of t-straight curves, our algorithms can be used for (1+ε')-approximate testing using essentially the same bounds as stated above with an additional factor of poly(1/(ε')).
Cite as

Peyman Afshani, Maike Buchin, Anne Driemel, Marena Richter, and Sampson Wong. Property Testing of Curve Similarity. In 33rd Annual European Symposium on Algorithms (ESA 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 351, pp. 84:1-84:16, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{afshani_et_al:LIPIcs.ESA.2025.84,
  author =	{Afshani, Peyman and Buchin, Maike and Driemel, Anne and Richter, Marena and Wong, Sampson},
  title =	{{Property Testing of Curve Similarity}},
  booktitle =	{33rd Annual European Symposium on Algorithms (ESA 2025)},
  pages =	{84:1--84:16},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-395-9},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{351},
  editor =	{Benoit, Anne and Kaplan, Haim and Wild, Sebastian and Herman, Grzegorz},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ESA.2025.84},
  URN =		{urn:nbn:de:0030-drops-245522},
  doi =		{10.4230/LIPIcs.ESA.2025.84},
  annote =	{Keywords: Fr\'{e}chet distance, Trajectory Analysis, Curve Similarity, Property Testing, Monotonicity Testing}
}
Document
Track A: Algorithms, Complexity and Games
DOI: 10.4230/LIPIcs.ICALP.2025.133
Faster, Deterministic and Space Efficient Subtrajectory Clustering

Authors: Ivor van der Hoog, Thijs van der Horst, and Tim Ophelders

Published in: LIPIcs, Volume 334, 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)

Abstract
Given a trajectory T and a distance Δ, we wish to find a set C of curves of complexity at most 𝓁, such that we can cover T with subcurves that each are within Fréchet distance Δ to at least one curve in C. We call C an (𝓁,Δ)-clustering and aim to find an (𝓁,Δ)-clustering of minimum cardinality. This problem variant was introduced by Akitaya et al. (2021) and shown to be NP-complete. The main focus has therefore been on bicriteria approximation algorithms, allowing for the clustering to be an (𝓁, Θ(Δ))-clustering of roughly optimal size. We present algorithms that construct (𝓁,4Δ)-clusterings of 𝒪(k log n) size, where k is the size of the optimal (𝓁, Δ)-clustering. We use 𝒪(n³) space and 𝒪(k n³ log⁴ n) time. Our algorithms significantly improve upon the clustering quality (improving the approximation factor in Δ) and size (whenever 𝓁 ∈ Ω(log n / log k)). We offer deterministic running times improving known expected bounds by a factor near-linear in 𝓁. Additionally, we match the space usage of prior work, and improve it substantially, by a factor super-linear in n𝓁, when compared to deterministic results.
Cite as

Ivor van der Hoog, Thijs van der Horst, and Tim Ophelders. Faster, Deterministic and Space Efficient Subtrajectory Clustering. In 52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 334, pp. 133:1-133:18, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{vanderhoog_et_al:LIPIcs.ICALP.2025.133,
  author =	{van der Hoog, Ivor and van der Horst, Thijs and Ophelders, Tim},
  title =	{{Faster, Deterministic and Space Efficient Subtrajectory Clustering}},
  booktitle =	{52nd International Colloquium on Automata, Languages, and Programming (ICALP 2025)},
  pages =	{133:1--133:18},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-372-0},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{334},
  editor =	{Censor-Hillel, Keren and Grandoni, Fabrizio and Ouaknine, Jo\"{e}l and Puppis, Gabriele},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.ICALP.2025.133},
  URN =		{urn:nbn:de:0030-drops-235109},
  doi =		{10.4230/LIPIcs.ICALP.2025.133},
  annote =	{Keywords: Fr\'{e}chet distance, clustering, set cover}
}
Document
Media Exposition
DOI: 10.4230/LIPIcs.SoCG.2025.85
Finding Shortest Reconfiguration Sequences for Modular Robots (Media Exposition)

Authors: UML Modular Robotics Group, Hugo A. Akitaya, Andrew Clements, Sam Downey, Jonathan Eisenbies, Soham Samanta, Gabriel Shahrouzi, and Frederick Stock

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
This paper introduces a set of tools built to help researchers design algorithms for modular robots. These tools can brute force solutions to specific reconfigurations, visualize movements of modular robots, and can be used to design specific configurations of robots. Multiple models of modular robots are supported, and can be added by users.
Cite as

UML Modular Robotics Group, Hugo A. Akitaya, Andrew Clements, Sam Downey, Jonathan Eisenbies, Soham Samanta, Gabriel Shahrouzi, and Frederick Stock. Finding Shortest Reconfiguration Sequences for Modular Robots (Media Exposition). In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 85:1-85:5, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{umlmodularroboticsgroup_et_al:LIPIcs.SoCG.2025.85,
  author =	{UML Modular Robotics Group and A. Akitaya, Hugo and Clements, Andrew and Downey, Sam and Eisenbies, Jonathan and Samanta, Soham and Shahrouzi, Gabriel and Stock, Frederick},
  title =	{{Finding Shortest Reconfiguration Sequences for Modular Robots}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{85:1--85:5},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.85},
  URN =		{urn:nbn:de:0030-drops-232371},
  doi =		{10.4230/LIPIcs.SoCG.2025.85},
  annote =	{Keywords: modular reconfigurable robots, sliding cube model, reconfiguration}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.5
Optimal Motion Planning for Two Square Robots in a Rectilinear Environment

Authors: Pankaj K. Agarwal, Mark de Berg, Benjamin Holmgren, Alex Steiger, and Martijn Struijs

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
Let W ⊂ ℝ² be a rectilinear polygonal environment (that is, a rectilinear polygon potentially with holes) with a total of n vertices, and let A,B be two robots, each modeled as an axis-aligned unit square, that can move rectilinearly inside W. The goal is to compute an optimal collision-free motion plan π for A and B between a given pair of source and target configurations. We study two variants of this problem and obtain the following results. - Min-Sum: Here the goal is to compute a motion plan that minimizes the sum of the lengths of the paths of the robots. We present an O(n⁴log n)-time algorithm for computing an optimal solution to the min-sum problem. This is the first polynomial-time algorithm to compute an optimal, collision-free motion of two robots amid obstacles in a planar polygonal environment. - Min-Makespan: Here the robots can move with at most unit speed, and the goal is to compute a motion plan that minimizes the maximum time taken by a robot to reach its target location. We prove that the min-makespan variant is NP-hard.
Cite as

Pankaj K. Agarwal, Mark de Berg, Benjamin Holmgren, Alex Steiger, and Martijn Struijs. Optimal Motion Planning for Two Square Robots in a Rectilinear Environment. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 5:1-5:17, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{agarwal_et_al:LIPIcs.SoCG.2025.5,
  author =	{Agarwal, Pankaj K. and de Berg, Mark and Holmgren, Benjamin and Steiger, Alex and Struijs, Martijn},
  title =	{{Optimal Motion Planning for Two Square Robots in a Rectilinear Environment}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{5:1--5:17},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.5},
  URN =		{urn:nbn:de:0030-drops-231577},
  doi =		{10.4230/LIPIcs.SoCG.2025.5},
  annote =	{Keywords: Computational geometry, motion planning, multiple robots, rectilinear paths}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.12
Higher-Order Color Voronoi Diagrams and the Colorful Clarkson-Shor Framework

Authors: Sang Won Bae, Nicolau Oliver, and Evanthia Papadopoulou

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
Given a set S of n colored sites, each s ∈ S associated with a distance-to-site function δ_s : ℝ² → ℝ, we consider two distance-to-color functions for each color: one takes the minimum of δ_s for sites s ∈ S in that color and the other takes the maximum. These two sets of distance functions induce two families of higher-order Voronoi diagrams for colors in the plane, namely, the minimal and maximal order-k color Voronoi diagrams, which include various well-studied Voronoi diagrams as special cases. In this paper, we derive an exact upper bound 4k(n-k)-2n on the total number of vertices in both the minimal and maximal order-k color diagrams for a wide class of distance functions δ_s that satisfy certain conditions, including the case of point sites S under convex distance functions and the L_p metric for any 1 ≤ p ≤ ∞. For the L_1 (or, L_∞) metric, and other convex polygonal metrics, we show that the order-k minimal diagram of point sites has O(min{k(n-k), (n-k)²}) complexity, while its maximal counterpart has O(min{k(n-k), k²}) complexity. To obtain these combinatorial results, we extend the Clarkson-Shor framework to colored objects, and demonstrate its application to several fundamental geometric structures, including higher-order color Voronoi diagrams, colored j-facets, and levels in the arrangements of piecewise linear/algebraic curves/surfaces. We also present iterative algorithms to compute higher-order color Voronoi diagrams.
Cite as

Sang Won Bae, Nicolau Oliver, and Evanthia Papadopoulou. Higher-Order Color Voronoi Diagrams and the Colorful Clarkson-Shor Framework. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 12:1-12:19, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{bae_et_al:LIPIcs.SoCG.2025.12,
  author =	{Bae, Sang Won and Oliver, Nicolau and Papadopoulou, Evanthia},
  title =	{{Higher-Order Color Voronoi Diagrams and the Colorful Clarkson-Shor Framework}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{12:1--12:19},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.12},
  URN =		{urn:nbn:de:0030-drops-231647},
  doi =		{10.4230/LIPIcs.SoCG.2025.12},
  annote =	{Keywords: higher-order Voronoi diagrams, color Voronoi diagrams, Hausdorff Voronoi diagrams, colored j-facets, arrangements, Clarkson-Shor technique}
}
Document
DOI: 10.4230/LIPIcs.SoCG.2025.78
Efficient Greedy Discrete Subtrajectory Clustering

Authors: Ivor van der Hoog, Lara Ost, Eva Rotenberg, and Daniel Rutschmann

Published in: LIPIcs, Volume 332, 41st International Symposium on Computational Geometry (SoCG 2025)

Abstract
We cluster a set of trajectories 𝒯 using subtrajectories of 𝒯. We require for a clustering C that any two subtrajectories (𝒯[a, b], 𝒯[c, d]) in a cluster have disjoint intervals [a,b] and [c, d]. Clustering quality may be measured by the number of clusters, the number of vertices of 𝒯 that are absent from the clustering, and by the Fréchet distance between subtrajectories in a cluster. A Δ-cluster of 𝒯 is a cluster 𝒫 of subtrajectories of 𝒯 with a centre P ∈ 𝒫, where all subtrajectories in 𝒫 have Fréchet distance at most Δ to P. Buchin, Buchin, Gudmundsson, Löffler and Luo present two O(n² + n m 𝓁)-time algorithms: SC(max, 𝓁, Δ, 𝒯) computes a single Δ-cluster where P has at least 𝓁 vertices and maximises the cardinality m of 𝒫. SC(m, max, Δ, 𝒯) computes a single Δ-cluster where 𝒫 has cardinality m and maximises the complexity 𝓁 of P. In this paper, which is a mixture of algorithms engineering and theoretical insights, we use such maximum-cardinality clusters in a greedy clustering algorithm. We first provide an efficient implementation of SC(max, 𝓁, Δ, 𝒯) and SC(m, max, Δ, 𝒯) that significantly outperforms previous implementations. Next, we use these functions as a subroutine in a greedy clustering algorithm, which performs well when compared to existing subtrajectory clustering algorithms on real-world data. Finally, we observe that, for fixed Δ and 𝒯, these two functions always output a point on the Pareto front of some bivariate function θ(𝓁, m). We design a new algorithm PSC(Δ, 𝒯) that in O(n² log⁴ n) time computes a 2-approximation of this Pareto front. This yields a broader set of candidate clusters, with comparable quality to the output of the previous functions. We show that using PSC(Δ, 𝒯) as a subroutine improves the clustering quality and performance even further.
Cite as

Ivor van der Hoog, Lara Ost, Eva Rotenberg, and Daniel Rutschmann. Efficient Greedy Discrete Subtrajectory Clustering. In 41st International Symposium on Computational Geometry (SoCG 2025). Leibniz International Proceedings in Informatics (LIPIcs), Volume 332, pp. 78:1-78:20, Schloss Dagstuhl – Leibniz-Zentrum für Informatik (2025)

Copy BibTex To Clipboard

@InProceedings{vanderhoog_et_al:LIPIcs.SoCG.2025.78,
  author =	{van der Hoog, Ivor and Ost, Lara and Rotenberg, Eva and Rutschmann, Daniel},
  title =	{{Efficient Greedy Discrete Subtrajectory Clustering}},
  booktitle =	{41st International Symposium on Computational Geometry (SoCG 2025)},
  pages =	{78:1--78:20},
  series =	{Leibniz International Proceedings in Informatics (LIPIcs)},
  ISBN =	{978-3-95977-370-6},
  ISSN =	{1868-8969},
  year =	{2025},
  volume =	{332},
  editor =	{Aichholzer, Oswin and Wang, Haitao},
  publisher =	{Schloss Dagstuhl -- Leibniz-Zentrum f{\"u}r Informatik},
  address =	{Dagstuhl, Germany},
  URL =		{https://drops.dagstuhl.de/entities/document/10.4230/LIPIcs.SoCG.2025.78},
  URN =		{urn:nbn:de:0030-drops-232308},
  doi =		{10.4230/LIPIcs.SoCG.2025.78},
  annote =	{Keywords: Algorithms engineering, Fr\'{e}chet distance, subtrajectory clustering}
}
  • Refine by Type
  • 20 Document/PDF
  • 17 Document/HTML

  • Refine by Publication Year
  • 4 2026
  • 13 2025
  • 1 2021
  • 1 2020
  • 1 2019

  • Refine by Author
  • 4 van der Hoog, Ivor
  • 3 A. Akitaya, Hugo
  • 3 Demaine, Erik D.
  • 3 Rotenberg, Eva
  • 2 Conradi, Jacobus
  • Show More...

  • Refine by Series/Journal
  • 20 LIPIcs

  • Refine by Classification
  • 14 Theory of computation → Computational geometry
  • 4 Theory of computation → Design and analysis of algorithms
  • 1 Computing methodologies → Motion path planning
  • 1 Mathematics of computing → Combinatorics
  • 1 Mathematics of computing → Graph algorithms
  • Show More...

  • Refine by Keyword
  • 7 Fréchet distance
  • 3 reconfiguration
  • 2 Algorithms engineering
  • 2 geometric algorithm
  • 2 modular robots
  • Show More...

Any Issues?
X

Feedback on the Current Page

CAPTCHA

Thanks for your feedback!

Feedback submitted to Dagstuhl Publishing

Could not send message

Please try again later or send an E-mail
© 2023-2026 Schloss Dagstuhl – LZI GmbH Schloss Dagstuhl – LZI GmbH About DROPS Imprint Privacy Contact